When it comes to wax and ceramic discussions, it's good to know the specific product. Apparently, some big-name spray ceramics are not so good....
Assuming it's in salt water, 1t would be best to remove it and have it cleaned, lubed, and protected. The probable outcome if you leave it or...
Garmin begins to restore Garmin Connect features, services, says customer data not impacted Good to hear. I was thinking all along that a tech...
The big question is; Is the need occasional while traveling, or constant at a home slip? From my experience, the fix is often determined by the...
Moisture wicks up from underneath. I would reef out as much bedding from under the wood as possible and then inject bedding in under it. Boat Life...
It can be the probe, although they tend to be all or nothing. You can pull it and examine it closely. If it's the dual pin type, those pins are...
Cleaning and storage processes have also changed over the years, and mostly after the routine fitting of fresh water flush. Back in the day, the...
Click on the the member's name to the left of the post. Look for the link to "Start a Conversation" to Private Message. You did an OK job of...
When RO watermakers first became available for recreational users, the instructions said to dial it up to 800 lbs. As the sea water became warmer,...
I have absolutely no doubt, that you play by the rules, Ken, but I wonder if someone could use the anonymous mail-in to do an end around and send...
If you have or do your own bottom maintenance, you could try something like this, [ATTACH] I have no experience with it, but a wax that can be...
Had that exact problem on a set on a N55. It was the pressure sender. Dave from ABT came to the boat in Seattle, verified the fault, and changed...
Beware of products similar looking to Shurhold. Different manufacturers don't play nice together, but some aftermarket suppliers have made good...
None are great. Cojo is just an anchorage with rocks and kelp, no shoreside attractions. Port San Luis has no marinas, just mooring balls. There...
Don't plan on a schedule. It can get ugly enough north of Conception to keep you hunkered down in Santa Barbara or Cojo anchorage. Check with the...
The important aspect of adding it through the deck fitting is that none of it collects in low spots in the hoses and is wasted. The effective...
No! The loads caused by inertia can be much greater than the weight of the dingy alone. Not only should the anchorage points be through-bolted,;...
Good point about location. I'm surprised at the difficulties the OP is having in just selecting a yard in the home of Cheoy Lee. The availability...
If there's a soft wall hose on the bypass port, and he pulls the hose off, then the bypass port is free-flowing. That leaves the hose that may or...
Maybe I wasn't clear. Pull the hose from the diverter and plug it to keep brine from flowing back. If the diverter valve is flowing product water...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")