A lot depends on what kind of exhaust the engines have and the potential for condensation in the exhaust system. The most compelling issue is that...
Good one, Ed! :D
The trouble with some PropSpeed applications is that the metals are sometimes coarsely abraded so the coating has more "tooth" to adhere to. If...
I've delivered many boats that were either brand-new or recently sold. Many of them had no galley gear other than a microwave. No pots, pans, or...
I know you're replacing, the heads, but be sure and check the "Y" valves for blockage. I ran a yacht that had valves below the waterline, and...
Be sure and let the painter know what you used, and maybe supply the MSDS. The manufacturer lists Polydimethylsiloxane as an ingredient, which is...
I've seen that happen on a Detroit 8V92, where the T-bolt type of clamp that secures two parts of the exhaust flanges together simply broke and...
It's good to see a proper lookout posted on the bow. Not many do that.
Another possible improvement would be mounting a quality remote speaker in the overhead/headlining right above your better ear when standing at...
The uncleaned brush should be in plastic in the freezer next to the ice cream, though.
Could it have been arrival at waypoint? The gear we had on the last delivery did that. The plotter was Nobeltec TZ, though, but there's been a lot...
There's a lot of advancing technology on wrap material. I started to look into it at first as part of headlight restoration, and then progressed...
Thanks, Brian, good post. Turns out that Zuckerberg personally met with the President to put in his 2 cents on Tik Tok...
A good way to mount a transducer inside the hull is to site it first. If there are any air bubbles in the laminate, there will be a great loss of...
It's not something you can rely on. I tried to reach the USCG on every CG frequency from Cedros Island on the Baja one time and could not raise...
FWIW, a chain can be re-galvanized. Had one done once, and the results were not desirable. When they did it, they gathered up a number of loops...
+1 on the glue strips. Had a cucaracha problem on a yacht, and tried the bombs, sprays and "hotels". None worked for long. I learned that...
We do a lot of deliveries to/from Ensenada, MX. It's about 60 miles, and we get questioned about needing two people frequently when giving a...
No, no SS liners, and what you say is what happened. A little drool at the silicone hose, and snug up the T-clamps, then OK for a while. "E"...
That's what I thought until I had an issue with 3406 Cats that were overheating and distorting the fiberglass exhaust tubes. The engine temps...
