Click for Abeking Click for YF Listing Service Cick to Clean Black Water Click for Ocean Alexander Click for Nordhavn

Newbie looking at a 32' Roamer

Discussion in 'Chris Craft Roamer Yacht' started by marsh12718, Jul 13, 2008.

You need to be registered and signed in to view this content.
  1. marsh12718, Jul 13, 2008
    #1
    marsh12718

    marsh12718 New Member

    Joined:
    Jul 13, 2008
    Messages:
    1
    Location:
    Rochester, NY on sthe sunny shores of Lake Ontario
    Hi, I am looking at a 32 Roamer here in Rochester, NY, and have ZERO experience with steel hulls. I have had several fiberglass and one wood boat. This boat is in fair condition, needs one engine, and some woodwork which I can handle. I couldn't find a hull number but I didn't look too far in the bilges. Can anyone point me to some info on these boats, and possibly some steel hull advice? It looks like there is at least one hole on the bottom of the transom. I would need LOTS of paint and varnish, and it looks like some wood (plywood) would need replacing, which I could do, but the steel hull kind of scares me. Can I patch this with a MIG welder? The price is right, but this is a big project and any help with info would be appreciated. I just love the look of the old CC's!

    Thanks,
    Marshall
  2. alloyed2sea, Jul 20, 2008
    #2
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    Free Advice

    Many articles on steel hulls here:
    http://www.geocities.com/alloyed2sea/TechnicalForum.html
    Experts located here:
    http://www.metalboatsociety.com/
    I tell everyone, no matter what kind of boat they are considering buying - get a survey, and go with the surveyor over the boat. They love to show you how much they know and what you are getting into. Make sure yours can and does perform audio-gauging the hull to determine steel plate thickness in those "tender" areas (where water collects inside the hull).:cool:
    Cheers!
    Eric