Click for Burger Click for Perko Click for YF Listing Service Click for Nordhavn Click for Cross

Plans and or Lofting Drawings 37' Roamer

Discussion in 'Chris Craft Roamer Yacht' started by Caledonia, Mar 26, 2007.

You need to be registered and signed in to view this content.
  1. Caledonia, Mar 26, 2007
    #1
    Caledonia

    Caledonia New Member

    Joined:
    Oct 30, 2006
    Messages:
    20
    Location:
    Saint Paul MN
    Does anyone have access to either paper copies, pdf's or cad files of the plan view and or layour/ lofting plans for this boat?

    I am rebuilding a 37' Aluminum Roamer 1966 vintage. The rear deck has been replaced and the new 5.7 Crusaders will be installed in the next couple of weeks.

    I am starting to think about gutting out the interior cabin and designing a reconfigured layout more like the forward head verision of the Roamer circa 1971.
    Any Help would be appreciated.

    Saint Paul MN
  2. Fishe, Mar 26, 2007
    #2
    Fishe

    Fishe New Member

    Joined:
    Mar 26, 2007
    Messages:
    2
    Location:
    Gerritsen Beach, NY
    Drawings

    I was able to get electrical drawings for my 63 Commadore and will look into.. I thouht it was mariners somthing and a link was on the roamer web site...
  3. Caledonia, Mar 27, 2007
    #3
    Caledonia

    Caledonia New Member

    Joined:
    Oct 30, 2006
    Messages:
    20
    Location:
    Saint Paul MN
    Caledonia Plans

    Thanks for the relpy Fishe, I already contacted the Mariner's Museum in Virginia they don't have the hull plans that i am looking for on the Roamer 37'
  4. alloyed2sea, May 1, 2007
    #4
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    Interiors

    Here's a couple line drawings (including the rare factory "B" version) and a couple "custom" variants that Roamer owners have come up with over the years. :p

    Attached Files:

  5. alloyed2sea, May 1, 2007
    #5
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    INteriros 2

    A few more from "Fast Time" - 67 CCR Riv 37.
    INteresting approach and results, but wonder how much "structure" was altered/removed.:eek:

    Attached Files:

  6. Caledonia, May 1, 2007
    #6
    Caledonia

    Caledonia New Member

    Joined:
    Oct 30, 2006
    Messages:
    20
    Location:
    Saint Paul MN
    Thanks to Fast Time; there's some more grist for the mill if the owner would be good enough to forward the photos and any info on the interior upgrade i'd sure appreciate the help.
  7. alloyed2sea, May 1, 2007
    #7
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    And then there's "Adjournment"

    Click here to break your heart via "overexposure" - itz just money! :cool:
    http://www.geocities.com/super_roamer_38/Interior.html
    Some before/during shots of the latest refitment.
    [Remember - you asked for this]
    EX) Galley countertops = Avonite Metallic tusk...., goes well with Mikore and Mahogany dont ya tink?

    Attached Files:

  8. alloyed2sea, May 1, 2007
    #8
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    More "Adjournment" Refit Shotz

    And by that I mean, have another shot - I know itz killling me....:p

    Attached Files:

  9. alloyed2sea, May 1, 2007
    #9
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    "Adjournment" REDUX

    How 'bout 'nother for the road?;)

    Attached Files:

  10. alloyed2sea, May 1, 2007
    #10
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    "Adjournment" Part 3

    Or wuz dat 4?
    Anywho - da Piece da Resistance!
    [Watz dat you say? Just an ordinary room divider?? - Bond. James Bond.] :cool:

    Attached Files:

  11. SeaEric, May 2, 2007
    #11
    SeaEric

    SeaEric YF Historian

    Joined:
    Jan 28, 2007
    Messages:
    1,380
    Location:
    out on the dock
    WOW! Beautiful work. Looks like an ambitious project that is being executed to the highest level of workmanship and detail. I'd love to see more when she's further along.
  12. alloyed2sea, May 2, 2007
    #12
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    "Adjournment" Part IV

    Or is that V?
    Whatever: note the 2-way port hole on the fwd stateroom door.
    (Wacha doin' bakdere?:p )

    Attached Files:

  13. Caledonia, Jun 5, 2007
    #13
    Caledonia

    Caledonia New Member

    Joined:
    Oct 30, 2006
    Messages:
    20
    Location:
    Saint Paul MN
    Wow that some undertaking. There are a lot of iseas and details in that last post that i can think about using,
    On my project the engines are in and i have the deck back on the helm station area. I am extending the roof all the way back (an additional 6feet) to eliminate future drainage problems and rot on the new cabin sole. The lines on this boat are troublesome though.
    Like King James the 1st of Scotland i think that it will take all the oak trees in Fifeshire to finish this project. Unlike him i hope its not top heavy and results in a capsize.
  14. alloyed2sea, Jun 7, 2007
    #14
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    Bridge too far?

    Richard Avery's (CC Chief Designer, 1962-82) lines are indeed a critical issue.
    Brian struggled with that very issue when he added a flybridge to "Adjournment" (http://www.geocities.com/super_roamer_38/FlyingBridge.html)
    and I submit, something to seriously consider as you undertake your own modifications.
    Have pondered the idea of extending the hardtop myself - perhaps you might include the idea of a "piped" railing extension w/canvas stretched inbetween - mounted off of the original roof itself as an alternative (weighs less).
    Otherwise, I'd worry a bit about the strength of the overall superstructure.
    Still, it has been done before:
    http://www.geocities.com/alloyed2sea/Riviera_MY_38.html
    Interested in what you ultimately decide.
    Cheers!
    Eric
  15. Orestes, Feb 21, 2008
    #15
    Orestes

    Orestes New Member

    Joined:
    Feb 27, 2005
    Messages:
    26
    Location:
    RI - Cove Heavan Mariina Barrington
    I am planning to open my Roamer Regal to the same interior as the Fast Time
    Good or bad?
    Can I have all the interior picts of the Fast Time?
    Orestes

    :)
  16. Laurence, Feb 22, 2008
    #16
    Laurence

    Laurence Senior Member

    Joined:
    Aug 30, 2006
    Messages:
    248
    Location:
    Chattanooga TN
    Hey, where did he get that shower stall? I would like to put that in my Offshore!
  17. alloyed2sea, Feb 22, 2008
    #17
    alloyed2sea

    alloyed2sea Moderator

    Joined:
    Jan 28, 2004
    Messages:
    872
    Location:
    Alex, VA
    All said,..

    ..., and done, I'm afraid.
    Thatz all the photoeZ he posted.
    Yikes!
    PS - Remember, dont remove structural elements without calling the gas company first. :eek:

    Attached Files:

  18. Orestes, Feb 23, 2008
    #18
    Orestes

    Orestes New Member

    Joined:
    Feb 27, 2005
    Messages:
    26
    Location:
    RI - Cove Heavan Mariina Barrington
    Ok got the message
    thanks
    O: