Windshield Vinyl Mesh Screen Replacement or Refurb?

Our black, vinyl windshield screen has become less-black over the years. I was about look up a tradesman to make a replacement when it occurred to me. What if I re-painted it? I would imagine a good scrubbing and then cleaning with spirits or acetone for paint prep would be the way to go. Has anyone ever tried spray painting these screens? If so, what type/brand of paint was used?

Maybe I'll just ship it to your wife. What's her turn-around?

I've read a few RV forums on this issue. The conventional wisdom is to spray with a thinned out paint. Before drying, blow the mesh with compressed air to prevent/reduce clogging of the mesh. I would assume the screen should be suspended horizontally rather than vertically so any excess paint drips off rather than down the screen like a Plinko board. Once dry, a quick coat on the other side should do the trick.

Ralph, one fella had luck with Starbrite non-skid cleaner on his white mesh. Rinse well afterwards, I think it may degrade the stitching.

I'm thinking a paint similar to that used to paint plastic children's toys, climbing apparatus and the like. I don't think I have ever seen or heard of vinyl seat cover spray paint. Interesting though; I assume it stays fairly pliable?

Thanks for the info. Can Krylon go straight on or does the mesh need prep like a primer?

Update...

We spray painted the screen with Rustoleum Painter's Touch Ultra Cover which touts plastic applications. We used flat black.

After about 3 days, to protect the new coat, we sprayed the screen with Rustoleum Painter's Touch Ultra Cover clear matte to give the paint a fighting chance. It too is good for plastic.

The paint and protectant went on well and there was no clogging of the mesh.

The screen looks great and just last night survived a typical Great Lakes T-storm. Time will tell, I suppose.