Click for Ocean Alexander Click for JetForums Click for Westport Click for Perko Click for Glendinning

Carver 444 - Compare Data

Discussion in 'Carver Yacht' started by jlplatts, Dec 15, 2012.

Page 3 of 3
  1. ksbguy, Aug 21, 2018
    #41
    ksbguy

    ksbguy Member

    Joined:
    Aug 14, 2012
    Messages:
    91
    Location:
    Water
    Oh and don’t continue running it that way or you’ll be putting motors in it soon. You’re way out of spec right now...
  2. Bob capn, Aug 21, 2018
    #42
    Bob capn

    Bob capn New Member

    Joined:
    Apr 19, 2018
    Messages:
    5
    Location:
    morristown
    Thanks . I'll start with checking the tachs .
  3. Capt Ralph, Aug 22, 2018
    #43
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,638
    Location:
    Satsuma, FL
    Where do I start

    Call your local Volvo tech.
  4. Bob capn, Aug 23, 2018
    #44
    Bob capn

    Bob capn New Member

    Joined:
    Apr 19, 2018
    Messages:
    5
    Location:
    morristown
    It's so weird . When the boat was surveyed in MI. in March all was good . 2800 rpm each and 26mph . Boat was picked up 1st week of April by Russell Marine Transport who ran it into a tree in route , kept it in TX to do repairs and didn't get it here until 6/23 . We launched a few days later and now this is how it runs . They still don't have my boat back together and all that was damaged was the windshield and a scratch on the dash .
    Talked to the tech today and he suspects fuel filters . I sure hope he is correct .
    I will update when it gets solved . Thanks everyone .
Page 3 of 3