Click for Glendinning Click for Burger Click for Abeking Click for Burger Click for Westport

Painting big metal anchor- any advice?

Discussion in 'Technical Discussion' started by Noa Ramot, Dec 13, 2016.

  1. Noa Ramot

    Noa Ramot New Member

    Joined:
    Sep 5, 2016
    Messages:
    12
    Location:
    Tel Aviv
    Hi all..

    We want to paint our anchor ( silver) what is the best way? We don't anchor much so anchor is mostly exposed to sun and sea salt

    Advice thanks
  2. Lepke

    Lepke Member

    Joined:
    Dec 26, 2015
    Messages:
    123
    Location:
    US West Coast. Cruise NW Passage to Alaska.
    Any steel/cast iron, I use cold galvanizing spray after cleaning rusted areas. Then paint however you want. Big anchors I usually brush because it's too much trouble to prevent overspray.
  3. CaptPKilbride

    CaptPKilbride Senior Member

    Joined:
    Mar 16, 2004
    Messages:
    587
    Location:
    On the water
    I have used Pettit Rustlok 6980 on galvanized anchors in poor condition, with very good results.
  4. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,594
    Location:
    Fort Lauderdale
    After wire brushing anything loose, treating it with Ospho before painting works well for me.
  5. T.K.

    T.K. Senior Member

    Joined:
    Jan 31, 2007
    Messages:
    1,011
    Location:
    Cairo - Egypt
    Best is to sand blast prior to the cold galvanised spray. If you can have it hot dip galavanised, that would be the ideal.
  6. menkes

    menkes Member

    Joined:
    Mar 13, 2007
    Messages:
    107
    Location:
    Aretsou, greece
    Noa
    T.K. words are gold advice
    Specialy the hot deeping.
    My expiriance of 40 years and about 8 anchors and chains prove it.
    You'll find places who do this job in Ramla/Lod or Or-Yehuda