Click for Ocean Alexander Click for YF Listing Service Click for Burger Click for YF Listing Service Click for Delta

Northern Marine...new 64' roll out May 2011

Discussion in 'Northern Marine Yacht' started by Alaskan, May 6, 2011.

  1. Alaskan, May 6, 2011
    #1
    Alaskan

    Alaskan New Member

    Joined:
    Jan 25, 2006
    Messages:
    14
    Location:
    Alaska
    Bud just rolled her out the 1st week of May...some significant exterior changes from the last 64..

    And yes....Bud and crew are alive and well in the same location with a number of boats in process.

    Along with developing the waterfront property across the street for a new paint shop, launch facility, yacht storage and public-use area.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
  2. dennismc, May 6, 2011
    #2
    dennismc

    dennismc Senior Member

    Joined:
    Jan 29, 2009
    Messages:
    1,178
    Location:
    Vancouver BC
    Northern Marine

    Looks like a dry stacker.. interesting treatment of the aft cockpit area.
  3. KeyportTroller, May 9, 2011
    #3
    KeyportTroller

    KeyportTroller New Member

    Joined:
    Mar 10, 2011
    Messages:
    10
    Location:
    West Puget Sound
    Dry Stacker?

    Are you referring to the exhaust system or the laminate schedule? I do not see an exhaust pipe between the radar arches.
  4. Capt J, May 9, 2011
    #4
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,609
    Location:
    Fort Lauderdale
    It's nice to see them producing boats........ I'm not familiar with the 64', but have been on the 76' more than a few times and it's a nice boat.
  5. Alaskan, May 9, 2011
    #5
    Alaskan

    Alaskan New Member

    Joined:
    Jan 25, 2006
    Messages:
    14
    Location:
    Alaska
    Dennis was referring to the exhaust which has not been installed as yet
    up top-side.....

    He'd simply noticed that it wasn't present on the hull.

    Stay tuned right here for additional pictures as progress continues on this new vessel...
  6. KeyportTroller, May 10, 2011
    #6
    KeyportTroller

    KeyportTroller New Member

    Joined:
    Mar 10, 2011
    Messages:
    10
    Location:
    West Puget Sound
    It's a beautiful vessel and must be huge inside with the full beam midship salon. I like the pilothouse access to the midship door port, preserving interior and minimising weather deck area behind the bulwarks. And what a hull shape. I will have to drive by and take a look in Anacortes this week. Keep us posted. Thanks Alaskan
  7. Aquila101, Jun 23, 2011
    #7
    Aquila101

    Aquila101 New Member

    Joined:
    Jun 11, 2011
    Messages:
    1
    Location:
    Los Amgeles
    If you would like to know more about Aquila just ask. By the way it is not dry stack. The mast section is fabricated from 316 ss bead blasted finish, no paint required.
  8. KeyportTroller, Jun 23, 2011
    #8
    KeyportTroller

    KeyportTroller New Member

    Joined:
    Mar 10, 2011
    Messages:
    10
    Location:
    West Puget Sound
    Then does the exhaust exit on the port quarter from the hole above the jack stands?
  9. Marmot, Jun 23, 2011
    #9
    Marmot

    Marmot Senior Member

    Joined:
    May 20, 2007
    Messages:
    3,300
    Location:
    9114 S. Central Ave
    Don't know what to think about the design, it looks like a cross between the Goodtime III, a CHB trawler, and something out of Dutch Harbor.