Click for Delta Click for Burger Click for Westport Click for YF Listing Service Click for Nordhavn

Marquis 59 basket strainers

Discussion in 'Marquis Yacht' started by jschriman, Apr 5, 2026 at 9:43 PM.

You need to be registered and signed in to view this content.
  1. jschriman, Apr 5, 2026 at 9:43 PM
    #1
    jschriman

    jschriman New Member

    Joined:
    Jun 7, 2020
    Messages:
    6
    Location:
    Tampa
    I have a 2007 M 59 with MTU series 60s and can't figure out which basket strainers I have. The ones in it were wrong. Too small by like 3" - they were barely strainer ing!

    Anyone know the brand and or size?? Thanks in advance.
  2. Capt Ralph, Apr 5, 2026 at 10:18 PM
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    14,296
    Location:
    Satsuma, FL
    Can you send pictures and measurements?
  3. jschriman, Apr 6, 2026 at 7:39 AM
    #3
    jschriman

    jschriman New Member

    Joined:
    Jun 7, 2020
    Messages:
    6
    Location:
    Tampa
    14" L x 3" Dia. But they fall wayyy into the strainer they are stainless. I'll get pics but they are incorrect. Looks like they need to be 17". I measured
  4. ranger58sb, Apr 6, 2026 at 7:42 AM
    #4
    ranger58sb

    ranger58sb Senior member

    Joined:
    Aug 20, 2013
    Messages:
    977
    Location:
    Chesapeake Bay, USA
    Are you saying the baskets you have are too short for your strainer housings?

    You could try rummaging around on the likely OEM sites -- Groco, Hydrasearch (nee Buck Algonquin), etc.

    -Chris
  5. jschriman, Apr 6, 2026 at 9:46 AM
    #5
    jschriman

    jschriman New Member

    Joined:
    Jun 7, 2020
    Messages:
    6
    Location:
    Tampa
    Started looking and yes they are too short

    I'll keep looking by think it'd be nice to know what the original ones were. Thanks
  6. Capt Ralph, Apr 6, 2026 at 10:02 AM
    #6
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    14,296
    Location:
    Satsuma, FL
    My 3" Groco's fall way down there. If the handles were missing, could be hard to get them back out.