Click for JetForums Click for Burger Click for Delta Click for Burger Click for Mulder

Glacier Bay Motor Switch TRP215K-B, for 2006 Boat

Discussion in 'Electronics' started by James Gordley, Sep 8, 2024.

  1. James Gordley

    James Gordley New Member

    Joined:
    Sep 8, 2024
    Messages:
    4
    Location:
    5065 Zander Dr Bellingham WA
    our toggle switch is very corroded and needs replacing but can not find the switch plus the housing to rewire it. Anyone can help is greatly appreciated
  2. MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,225
    Location:
    Windsor On. Canada
  3. James Gordley

    James Gordley New Member

    Joined:
    Sep 8, 2024
    Messages:
    4
    Location:
    5065 Zander Dr Bellingham WA
    Thank you very much, was hoping to find a prewired switch
    Last edited: Sep 8, 2024
  4. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,427
    Location:
    Satsuma, FL
    Prewired??
    Prewired to what.
    I'm sorry but I do not understand anything past common switch connections.
    Could this be a factory modular switch assembly?
    Some pictures may help us better understand your issue.
  5. James Gordley

    James Gordley New Member

    Joined:
    Sep 8, 2024
    Messages:
    4
    Location:
    5065 Zander Dr Bellingham WA
    the photos do not want to open under the next window asking for the url address
  6. James Gordley

    James Gordley New Member

    Joined:
    Sep 8, 2024
    Messages:
    4
    Location:
    5065 Zander Dr Bellingham WA
    Here is a bit more info on the issue, Has low power to turn the motors over, twin 06 Suzuki, 150's. They either click or turn over very slowly. Terminals cleaned, 13 Volts in all 3 Batteries, 18 Volts at starter. Any Idea on where else to look, thought it might be the toggle switch but we can not find a replacement LIKE the old one.
  7. chesapeake46

    chesapeake46 Senior Member

    Joined:
    Jul 26, 2009
    Messages:
    1,829
    Location:
    Chesapeake Bay, Delaware Bay & S.Jersey
    Is that 18 Volts at the starter while it is cranking ?