Click for Abeking Click for Perko Click for Burger Click for Glendinning Click for Delta

Hynautic Steering

Discussion in 'Technical Discussion' started by SplashFl, Feb 6, 2024.

You need to be registered and signed in to view this content.
  1. SplashFl, Feb 6, 2024
    #1
    SplashFl

    SplashFl Senior Member

    Joined:
    Feb 2, 2021
    Messages:
    538
    Location:
    S. Florida _ Bertram 46
    Found a small fluid leak so time to get the steering unit rebuilt. Anyone used Southern Charm or recommend another ??
  2. Capt Ralph, Feb 6, 2024
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,498
    Location:
    Satsuma, FL
    If it is a pump leak, it is usually the front seal that leaks, right behind the wheel on the shaft leaking that requires a re-seal.
    A couple of O rings and that front seal is all that comes in the seal kit.
    Many times our customers had stated exactly what you typed above,, if not the front seal,, we find something is just loose behind the dash on the pump, not in the pump.
  3. Pascal, Feb 6, 2024
    #3
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,570
    Location:
    Miami, FL
    A few years ago they rebuilt both helm pumps and the ram. Reasonable and fast service
    SplashFl and Capt Ralph like this.
  4. SplashFl, Feb 7, 2024
    #4
    SplashFl

    SplashFl Senior Member

    Joined:
    Feb 2, 2021
    Messages:
    538
    Location:
    S. Florida _ Bertram 46
    I'm sure it's a pump leak. After letting out all the air pressure it eventually stopped dripping. Color code marked the hoses but ran out of daylight so not yet removed the 3 of them, nor did I see the model number on the square pump.
    The photo Southern Charm posted was probably as they planned, intimidating, so filled out all the info for service but not yet heard back. Might be simple O-ring but some things probably best left for the pro's.

    h-20-apart.jpg
  5. dewald, Feb 7, 2024
    #5
    dewald

    dewald Member

    Joined:
    Jun 27, 2017
    Messages:
    104
    Location:
    Treasure Island, Florida
    Used them Dec 2021 to rebuilt my Hynautic H-25. Nice guy did a great job. Nice thing he only a few miles away, so I was able to drop it off & pick it up when it was done.
    SplashFl likes this.
  6. motoryachtlover, Feb 7, 2024
    #6
    motoryachtlover

    motoryachtlover Senior Member

    Joined:
    Jan 29, 2007
    Messages:
    699
    Location:
    smithfield, VA
    I worked with Ross of Classic Yachts on my Hynautic engine controls and I liked him a lot. He is out of Ft Myers but does travel. 239 850 3715
  7. SplashFl, Feb 8, 2024
    #7
    SplashFl

    SplashFl Senior Member

    Joined:
    Feb 2, 2021
    Messages:
    538
    Location:
    S. Florida _ Bertram 46
    Super; will keep his name if any issues with the controls that so far (other then then they take more pressure to move then I suspect is normal) have been good. Ages ago used to run a Striker with same Hynautic Controls but don't recall them being as "stiff," and all 3 stations about the same. Shipped the H-21 helm to Southern Charm today.