Click for Walker Click for Burger Click here to Read More Click for JetForums Click for Burger

Carver rookie

Discussion in 'Carver Yacht' started by Chris Breese, Dec 27, 2023.

You need to be registered and signed in to view this content.
  1. Chris Breese, Dec 27, 2023
    #1
    Chris Breese

    Chris Breese New Member

    Joined:
    Dec 27, 2023
    Messages:
    4
    Location:
    San diego
    Hey guys I'm new here and pretty new to boating I just bought a carver 3207 one engine runs great the other has a Crack in the manifold and an s shaped small hose that connects to the heat exchange I can't find the ****
  2. leeky, Dec 28, 2023
    #2
    leeky

    leeky Senior Member

    Joined:
    Jan 2, 2011
    Messages:
    382
    Location:
    Florida
    Don't quit on us now, Chris! You were just getting to the good stuff. :) Welcome to YF.
    Chris Breese likes this.
  3. Pascal, Dec 28, 2023
    #3
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,580
    Location:
    Miami, FL
    It would help if you tell us what year and what engines you have in this thing…. If you have a cracked manifold, well you need to replace it!
  4. Chris Breese, Dec 29, 2023
    #4
    Chris Breese

    Chris Breese New Member

    Joined:
    Dec 27, 2023
    Messages:
    4
    Location:
    San diego
    So it's a 1989 carver 3207 with twin crusader 350s , everything I try and post the pictures I've taken I get an error message saying the file is too large

    Attached Files:

  5. Chris Breese, Dec 29, 2023
    #5
    Chris Breese

    Chris Breese New Member

    Joined:
    Dec 27, 2023
    Messages:
    4
    Location:
    San diego
    This is a picture of the hose i can't find
  6. Capt Ralph, Dec 29, 2023
    #6
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,553
    Location:
    Satsuma, FL
    With serial numbers, go to a Crusader shop and order one.
    You are probably not going to find one at NAPA.
  7. Chris Breese, Dec 29, 2023
    #7
    Chris Breese

    Chris Breese New Member

    Joined:
    Dec 27, 2023
    Messages:
    4
    Location:
    San diego
    Thank you for the tip the hose is destroyed the previous owner tried to use glue and a bunch of tape on it but I'm hoping I can find it on the other engine. Also does anyone know if the boat has rudders or an outdrive system ? I'm sorry for the stupid questions but you guys seem to know everything about these boats , I had a bayliner 3888 and I made a lot of mistakes with that one so I'm really trying to learn with this one. Thank you
  8. Capt Ralph, Dec 29, 2023
    #8
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,553
    Location:
    Satsuma, FL
    Unlike the other gas marinizers, Crusader never pushed their own Z drive.

    If the engine is mid ship and has a down (towards the stern) it is a direct drive inboard.
    Chris Breese likes this.