Click for Perko Click for Nordhavn Click for Abeking Click for Burger Click for Northern Lights

VacuFlush 32vdc head replacement

Discussion in 'General Yachting Discussion' started by PPD, Aug 6, 2023.

  1. PPD

    PPD Member

    Joined:
    May 17, 2020
    Messages:
    90
    Location:
    CT
    Looking for advice on what manufacturers are out there still making 32vdc heads compatible with the vacuflush system. I have several to replace on the Burger.
  2. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,677
    Location:
    Satsuma, FL
    The VF head does not use any electricity, Just the vacuum generator pump.
    The head and vacuum generator only work with each other.

    Is it this pump motor in 32V you are looking for?

    Or I did not understand your question.
    What do you want to end up with?

    My Bertram is still 32V.
    I'm having to make things work, thankfully, NOT VF equipment.
  3. PPD

    PPD Member

    Joined:
    May 17, 2020
    Messages:
    90
    Location:
    CT
    The pump system is in working order, the toilets themselves are very old and some of the seals and foot pedals aren’t functioning.

    I’m not familiar with the vacuflush system as all of my previous boats have had 12v electric heads.

    I’m believe I just need to replace the heads and not the pump system, but I don’t know where to buy or which manufacturers are out there.
  4. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,658
    Location:
    Miami, FL
    The heads are easy to rebuild, the the main seal and ball valve

    first check that the pumps are working: motors running, at least some vacuum building. If the motors are bad too, then you re better off switching to electric heads. Raritan Elegance are pretty good, that’s. What I used a few years ago to replace my 3 VFs.

    I don’t think they come in 32v though, so you ll have to either use converters or maybe set up a 12 or 24v sub panel for whatever systems you will need to convert
  5. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,677
    Location:
    Satsuma, FL
    You may have 32V motors on your vacuum pumps.
    The heads are serviceable.
    Replacement is not necessary unless they are just ugly.
    There will be a new foot print that may need some deck repairs.

    If you really want to replace them for a later style, The later Raritan units can not be beat.
    Remove ALL the VF stuff and run new (better) hoses directly to the black tank.

    Nobody is making 32v heads anymore.
    Rebuilding old units (Galley Maid, Raritan) is still an option.

    If you do not have a heavy 24V source onboard, I have over come this on our Bertram;
    As intermittent as heads operate, make a DCv sub breaker panel and tap 24volts from the 3rd battery in your 32v bank.
    Contact me directly if you need help on this.

    BTW, I'll offer a few pennies for your old vacuum pumps. All else is reef material (IMO).