Click for Burger Click for Burger Click for YF Listing Service Click for Walker Click for Ocean Alexander

Prop Size For 35' Viking 1986

Discussion in 'Viking Yacht' started by ERTW, Jun 20, 2018.

You need to be registered and signed in to view this content.
  1. ERTW, Jun 20, 2018
    #1
    ERTW

    ERTW Member

    Joined:
    Nov 19, 2006
    Messages:
    68
    Location:
    North America
    Trying to figure out optimum prop size for 35' viking convertible with twin 3208 TA 375hp , 1.512:1 ratio gearbox. Currently running 22 x 24 3 blade with no 7 cup. What are others running? I find I'm under rpm by about 300rpm.
  2. Capt Ralph, Jun 20, 2018
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,443
    Location:
    Satsuma, FL
    That is a lot of pitch.
    You called Viking yet?
  3. ERTW, Jun 21, 2018
    #3
    ERTW

    ERTW Member

    Joined:
    Nov 19, 2006
    Messages:
    68
    Location:
    North America
    Yes I emailed with viking and the hull number calls out for a 22 x 24 3 blade but not sure about the number cup they think possibly no. 2 cup.
  4. sheraton, Jul 23, 2018
    #4
    sheraton

    sheraton Member

    Joined:
    Jun 24, 2012
    Messages:
    43
    Location:
    Barnegat Bay New Jersey
    My Friend has the same exact boat and power, he has 22 x 23 with no cup.
  5. Gene Trevail, Oct 8, 2022
    #5
    Gene Trevail

    Gene Trevail New Member

    Joined:
    Sep 24, 2022
    Messages:
    1
    Location:
    Jacksonville Florida
    I have a 86 35 Viking Sportsfish Convertible with twin 383 Stroker mercruiser engines repower from the 454 mercruisers. Any recommendations on the prop size for these gas engines or will the old props work? Ty Gene
  6. Capt Ralph, Oct 8, 2022
    #6
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,443
    Location:
    Satsuma, FL
    You would be amazed what that new engine will do compared the the old LBC. I would give the original wheels a try and IF needed, a lil pitch removed.
    The important thing to watch, you make WOT RPM per spec with good load on board. Full fuel, water and the gear and people you usally cruise with.