Another Propspeed question— I have conflicting advice

I get about 1 year out of Prop Speed, it gradually gets thinner until transparent.
Not a big deal as I use the boat once, sometimes twice a week, heavy growth only if a boat is not being used.
Having a diver clean the bottom every 6-8 weeks, he keeps bragging about my bottom paint, the Trinidad HD, 13 months so far and in great shape.
Previous coats were Trinidad Pro, 27 months.
Got 4 years on the Pro with a Sailboat I owned for 14 years.
Switched to aluminum anodes last year, they last longer in brackish waters, 13 months so far.
Never tried the zinc paint.

I've been using PropSpeed for 15+ years. I've only ever had one problem, and it was a prep/application issue. Great stuff, and I can't imagine having a fixed-running-gear boat without it.

Is there any special way divers should clean propspeed Props? Or things they shouldn't do?

If it's doing it's job properly there shouldn't really be anything to clean. If there is growth, it will come off without any aggressive scrubbing and they should never need to scrape.

I’m based out of Tampa Bay and have used PropSpeed on my previous Sport Fish and current Motor Yacht. Can’t get past the fact that the west coast of Fl. is shallow and the PropSpeed will begin to noticeably wear within a few months (depending upon use).

During our last yard event (Owl Creek), the yard manager convinced me to try their method of hard bottom paint over primer. Basically, after prepping running gear they prime, then apply bottom paint while primer is tacky to “lock it in”. I may not be doing the method justice in my description, but, the final product has been best I’ve used in my 40 years of mucking around the west coast of Fl. Truly impressive resistance to growth and the bond is tenacious…

We've used it for 8 years on multiple boats and never had a problem. The problems people encounter are two fold. First application issues from those not experienced with it. Second, other brands that are rip offs of PropSpeed.

I only find it beneficial on a 35 knot SF where your options are prop speed, or nothing as bottom paint and other choices won't stick. I find that prop speed does nothing to stop growth from forming and growing, it just makes it easier for the diver to remove growth with a plastic putty knife or other means. I've found growth does not fall off when you run the boat or anything else with it. So I don't prop speed. On a slower boat, bottom paint does work quite well.....or tri-lux......

We had a bottom job done on a 74' yacht at a yard in the Miami river. They were big on selling jobs while the yacht was out. They assumed we would want prop speed (didn't have it before), so they abraded all the metals with 40 grit discs. It looked like they combed it with a rake. We told them to get stuffed on the Prop Speed and the prep work charges, so be careful when having the prep done.

Prop speed, application technique is critical. But divers merely wipe the surface to clean. Rarely if ever do they need any tools to remove any growth if cleaned every couple of months.

I use it on my bow thruster props, struts and shafts, rudders and trim tab bottoms. Works well.

hate to break it to you guys but it's not the application that is the issue with propspeed, it's the product that fails

I'd say you have a 50/50 chance of it falling off after a few months or keeping it for 1,5 seasons, if you like taking gambles go for it

I'd say to check your prep. Ive been using it for years on running gear, rudders, bow thruster blades, and trim tab bottoms. No issue with it falling off.

Not sure what experience you have with prop speed or boating but we've been using it since 07. Professionally applied by Merritt's or Spencer never any issues.

Hate to break it to you, but you're so obvious with your one post. How long have you worked for a competing product?

Propspeed for 10 years on a total of 8 boats. All professionally applied. Never a problem. Just wipe gently every month when bottom cleaned. Works 100% as advertised.

I have mixed feelings on prop speed. I find that it doesn’t inhibit growth at all, it just makes it easier for a river to remove the growth.

if you have electrolysis issues, no coatings on the props I’d going to stay