Click for Furuno Click for JetForums Click for YF Listing Service Click for Delta Click for Ocean Alexander

Any info on a 1978 benetti 100’ boat in Los Angeles ?

Discussion in 'Benetti Yacht' started by Matt46post, May 4, 2021.

You need to be registered and signed in to view this content.
  1. Matt46post, May 4, 2021
    #1
    Matt46post

    Matt46post Senior Member

    Joined:
    Apr 27, 2015
    Messages:
    226
    Location:
    El dorado hills california
    Anybody have any info on a 100’ forsale in Los Angeles , it’s on eBay and looks to have started life as a 88’ 1979 , it appears to have a steel hull aluminum super structure and was in a boat yard for 5 years and had a lot of work done to it but never finished, looks like it could be a nice project
  2. NYCAP123, May 5, 2021
    #2
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    Or it could be a money pit. Back in the 1990's a lot of boats were being extended. Some worked out better than others. 25% is quite an extension.
  3. leeky, May 5, 2021
    #3
    leeky

    leeky Senior Member

    Joined:
    Jan 2, 2011
    Messages:
    383
    Location:
    Florida
    I calculate 13.6%.
  4. MBevins, May 5, 2021
    #4
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,226
    Location:
    Windsor On. Canada
    I was thinking the same thing.:)
  5. NYCAP123, May 5, 2021
    #5
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    Correct. My mistake.
  6. Matt46post, May 5, 2021
    #6
    Matt46post

    Matt46post Senior Member

    Joined:
    Apr 27, 2015
    Messages:
    226
    Location:
    El dorado hills california
    I don’t think the extension is the issue , just wondering if anybody saw the boat during the 5 years on the hard going thru a refit and redesign of the hull and super structure
  7. MBevins, May 5, 2021
    #7
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,226
    Location:
    Windsor On. Canada
    Just busting your chops. :)
  8. Capt J, May 5, 2021
    #8
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,534
    Location:
    Fort Lauderdale
    It's a Benetti. That is ALL you need to know, RUN for the hills unless you're an ABCY certified marine electrician and 5'5 and 150 lbs. Not to mention it's about $250k or more to rebuild those old, smoky, 16v detroits, so you might as well plan on repowering it right off the bat or it won't ever be worth anything as far as resale goes.
  9. Matt46post, May 6, 2021
    #9
    Matt46post

    Matt46post Senior Member

    Joined:
    Apr 27, 2015
    Messages:
    226
    Location:
    El dorado hills california
    Really $250k to rebuild a pair of 16v Detroit’s , I don’t think so probably more like $60k
  10. Oscarvan, May 6, 2021
    #10
    Oscarvan

    Oscarvan Senior Member

    Joined:
    Nov 10, 2015
    Messages:
    969
    Location:
    Chesapeake Bay
    At $3000 a jug I'm at 100K And "while we're in there we may as well".... But yes, 250K is a little high drama.
  11. Capt J, May 6, 2021
    #11
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,534
    Location:
    Fort Lauderdale
    Try accessing the bottom end in that boat. The length of the crankshaft is also an issue. While you're there, the blocks should be seperated and new pins installed. 16's add a lot to rebuild, but call your local dealer and ask them what it costs.
  12. costalive, May 7, 2021
    #12
    costalive

    costalive Member

    Joined:
    Aug 19, 2011
    Messages:
    32
    Location:
    newport beach
    Maybe I can help I can’t find the listing can you post the link