Click for Cross Click for Northern Lights Click for Burger Click for YF Listing Service Click for Abeking

Flats boat for bow

Discussion in 'General Yachting Discussion' started by Alzira II, Dec 4, 2020.

You need to be registered and signed in to view this content.
Page 2 of 2
  1. JWL321, Dec 8, 2020
    #21
    JWL321

    JWL321 New Member

    Joined:
    Dec 6, 2016
    Messages:
    2
    Location:
    Stuart, FL
  2. NYCAP123, Dec 8, 2020
    #22
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    Nice rub rail, but I'm not sure how it'd work out as a fishing platform or some of the other uses you could have for a 13' BW. Also it should be pointed out that the 500 lb weight claimed is stripped. The 13 BW starts out at only 695 lbs. with seats, etc. and their 11' only 454 lbs. I think an earlier statement by Soulstice gave the impression that the 13 is a heavy boat, but it's actually lighter than this. They start getting heavier when you add motors, fuel, etc. Pretty much whatever you get in this size range will be about the same weight.
  3. BroadCove, Dec 14, 2020
    #23
    BroadCove

    BroadCove New Member

    Joined:
    Nov 3, 2020
    Messages:
    1
    Location:
    Alexandria, VA
    If you're really interested in a flats boat for a tender, check out these guys: https://www.dragonflyboats.net/models/yacht-tenders/ (I know this is my first post, but I have nothing to do with the builder. I just happened to see a 1989 Burger currently listed for sale that has one of these as a tender, and the tender is absolutely beautiful. Whether it's practical or not is a whole different question that I can't answer...)
  4. Alzira II, Dec 14, 2020
    #24
    Alzira II

    Alzira II Member

    Joined:
    Jan 22, 2019
    Messages:
    159
    Location:
    Fort Lauderdale
    This is more like what i had in mind. Not sure this is the actual answer but it seems more fishable although maybe not a whaler still.
    I still think there must be a way to do something out of aluminum that is not a "john boat" think more of a refined fit and finish of some of the aluminum hulls used by some of the rib companies. I enjoy checking out all the ribs at Miami show and I was pretty impressed by highfield. Seem to see them more on sailboats,,, and sailing la vegabonde.
  5. Capt J, Dec 14, 2020
    #25
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    yeah, until the aluminum bangs into your hull while you're lifting or lowering it and scratches the you know what out of paint.
Page 2 of 2