Click for Abeking Click for Westport Click for Delta Click for Cross Click for Mulder

Nervous over my larger boat purchase. Is this normal?

Discussion in 'General Yachting Discussion' started by Rick S, Oct 4, 2020.

You need to be registered and signed in to view this content.
  1. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,732
    Location:
    Vero Beach
    Actually think spring lines are both the first and third things.
  2. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,732
    Location:
    Vero Beach
    I don't sweat the dock help. I appreciate it, and I know that the plan here is merely to get lines on and the vessel (and surrounding vessels) out of harm's way. I always know that when we're in, that I'm spending the next 20 minutes reconfiguring everything. One of my pet peeves is dock hands that feel it imperative to cross spring lines at a companionway. But I don't bother trying to train them while coming in. We hand a line, give an instruction, then watch what actually happens and react to it.
  3. Zud

    Zud Senior Member

    Joined:
    May 17, 2015
    Messages:
    115
    Location:
    PA
    ...ford, I agree, I really appreciate the help from dockmates who have been doing this much longer than I. Just get me attached to the dock safely and once the engines are down I'll set my line as I like.
    The captain that delivered my boat always told me that you have three gears... forward , reverse, and neutral and at times neutral is more valuable that either of the other two.
  4. sgawiser

    sgawiser New Member

    Joined:
    May 13, 2008
    Messages:
    63
    Location:
    Jupiter, FL
    The worst problem we have is with dockhands who not only do not know what they are doing but refuse to listen to instructions. And it is tough to figure out how much a dock attendant knows when you come into a new marina. I can deal with the guests on the boat, it is those on the dock which worry me. We even had a fellow boat owner years ago release the lines and push us off the dock before we started the engines. Of course, this was on a much smaller boat.
  5. MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,225
    Location:
    Windsor On. Canada
    Our number one rule when approaching a dock is...never throw a line to anyone, no matter how many times they ask.
    Instead hand them the line and say please put this on that cleat.
    Years ago we were approaching the guest wall at our yacht club. My wife made the mistake of tossing the forward line to the dock person while I was still moving parallel to the dock. He immediately cleated my bow line and brought the boat to a hard stop almost throwing my wife off the bow.
    My wife learned a valuable lesson that day.
  6. T.K.

    T.K. Senior Member

    Joined:
    Jan 31, 2007
    Messages:
    1,011
    Location:
    Cairo - Egypt
    It's very normal, don't worry. Bigger vessels are easier to handle than smaller vessels once you get used to the dimensions and throttle/thruster responses. The concept is the same. Good luck.
  7. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,167
    Location:
    Sardinia
    I'm not sure the dock hand should be blamed for that.
    Passing a line already tied to your boat is the technique known as tying the dock to the boat, rather than the other way round.
    You'd better pass/throw the line keeping plenty of it at hand, and secure it to the boat, at the appropriate length, only after it's cleated on the dockside.
  8. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,732
    Location:
    Vero Beach
    Yeah, bigger is slower to stop, so move more slowly in tight situations until you get a feel for her. In fact, get her out into the open and move her around a bit. You'll get the feel pretty quickly.
  9. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,732
    Location:
    Vero Beach
    I agree. Honestly, I don't even care about the bow line unless working into a slip using dolphin pilings. I want a spring line in place and a stern line to keep me off my neighbors if the wind is blowing.
  10. cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,661
    Location:
    Cherry Hill, NJ
    Rick DOT calm your self! It will be easier as the others have said due to more weight and size. Hopefully you can find some empty slips/docks with no boats around to paly with till you get it down, which won't be long. Enjoy!! Just keep it slow incase you bump something other than another boat.
  11. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    We always rig the lines with the eye on the boat cleats in case nobody is there to assist. This way we pass the lines around a piling of dock cleat and bring it back to the boat allowing us to adjust as needed and when ready to leave lines are already doubled up and ready to be released from the boat. If somebody is on the dock and looks competent we may ask them to pass the line around a cleat or piling and send the bitter end back. I m always amazed at how some people can’t follow simple instructions about which piling to use and to return the line...

    Each landing is different and we gotten into a habit to number lines from bow to stern... this way I can give the sequence to the crew for ex 2,1,4,3 if coming alongside in the current off the bow. That way we re all on the same page and I know what to expect.
  12. cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,661
    Location:
    Cherry Hill, NJ
    What about when you only have cleats on the dock and no pilings? Do you do the same thing? I would be afraid of the line coming off the cleat when tension is released.
  13. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    Yes. We throw the bight of the line on the dock behind the cleat and then pull the bitter end catching the cleat. Once all the lines are secured we get on the dock and add a full wrap around the cleat.
  14. cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,661
    Location:
    Cherry Hill, NJ
    I will have to try that. That is a good idea. I'm just a little nervous about the line going limp and getting off the cleat, until you wrap it. BUT I will give it a few tries.
  15. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,167
    Location:
    Sardinia
    Fair enough.
    That's very different from the method I argued against, because you still are in control.
  16. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    We remain in control because the bitter end comes back to the boat. If we need to move the boat up or down the dock a few feet so that the boarding gate doesn’t end up in front of a piling or pedestal, we can adjust it. Keep in mind dock layout is very different on this side of the pond.

    When backing into a transient slip between pilings, with or without finger pier, we do the same thing. Pass the line around the piling (or cleat on the finger) and bring it back. In that case the spring lines are always the first ones to be set so the boat can’t back into the dock. Then we wiggle bow around to set the bow lines.

    at a home slip, backed in, Where the lines stay behind when we go out, I always use the eye of the spring lines on the boat cleat. This way I know for sure the stern can hit the dock, no adjustment needed. All the other lines are setup bitter end in the boat so the lines can be worked on the cleats to pick up slack against the wind. Trying to force an eye on a cleat against pressure is too hard and you risk hurting a finger between the line and the cleat


    even if the line is slack, it can’t get off the cleat as it’s weight keeps it on the dock.
  17. Ormond Bert54

    Ormond Bert54 Senior Member

    Joined:
    Mar 29, 2009
    Messages:
    470
    Location:
    Ormond Beach, FL
    I'm going through the same but I already know the answer. Go big, you will not be disappointed. I hired the captain who worked on the boat I purchased on a month to month basis. So, he is familiar with all the systems and can teach me. I lined it up (about 10 feet out from a dock yesterday) .. feel ready to pull it out of the slip later this week with the Captain close by my side ready to take over. It's big fun!
  18. Norseman

    Norseman Senior Member

    Joined:
    Feb 24, 2005
    Messages:
    3,110
    Location:
    Ft. Lauderdale
    Many different ways of skinny a cat:
    This is the easiest.
    A3D9A995-4A7B-4339-BC1C-A17B00B5A8E7.jpeg F5F16B6B-4F2C-4499-92C1-80A4D2484116.jpeg

    Then you change it to avoid chafe and avoid jumping line