Click for Cross Click for Delta Click for Westport Click for Furuno Click for Glendinning

MAN D2840LE401 Block Heaters

Discussion in 'Engines' started by Soulstice, Mar 21, 2020.

You need to be registered and signed in to view this content.
Page 2 of 2
  1. Soulstice, Mar 30, 2020
    #21
    Soulstice

    Soulstice Member

    Joined:
    Apr 1, 2013
    Messages:
    149
    Location:
    Portsmouth, Ri
    And the inboard side, I am not sure how to insert them so you can see them without clicking on them...

    Attached Files:

  2. Soulstice, Mar 30, 2020
    #22
    Soulstice

    Soulstice Member

    Joined:
    Apr 1, 2013
    Messages:
    149
    Location:
    Portsmouth, Ri
    No, I have just been using the table in the salon for the time being during the COVID crisis. With my wife also working home and my daughter out of school until May, it gets me out of their hair and allows me to focus on some work. Never going to complain about extra time on the boat, just need less video conferences especially during the German workday...
  3. Capt Ralph, Mar 30, 2020
    #23
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,486
    Location:
    Satsuma, FL
    Yep, HotStart heater and thermostat. Same on my Detroits.
  4. Beau, Mar 30, 2020
    #24
    Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    Completely different set up then mine....
  5. Beau, Mar 30, 2020
    #25
    Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    The second photo is of the thermostat. Mine is in a different spot. If you unscrew the cap you should have a double pin plug inside. Try cleaning the pins and receptacles? Make sure the system isn't energized when you do that. Did you test continuity on the heating element and the thermostat? Does the system throw the panel breaker when you try to engage the heater? Are the engine breakers in the ER in the "on" position? Sometimes during winterizing they can be shut off inadvertently by moving around the engine space.
Page 2 of 2