Click for JetForums Click for Delta Click for Burger Click for Walker Click for Perko

Water pump leak

Discussion in 'Ocean Yacht' started by Boomer, Feb 3, 2020.

You need to be registered and signed in to view this content.
Page 1 of 3
  1. Boomer, Feb 3, 2020
    #1
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    Hello all....did pressure test on the coolant side of the motor and all was well after the rebuild...during test run on the motor I noticed an occasional coolant drip from the fresh water pump...appears to be coming out of the shaft area...I assume rebuild is needed..are the bearings pressed in or is just a simple rebuild job with gaskets and seal rings? Schematic doesn't notate if the bearings are pressed in or not
  2. Capt J, Feb 3, 2020
    #2
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,534
    Location:
    Fort Lauderdale
    Not sure, most DD shops could answer your question.
  3. Boomer, Feb 3, 2020
    #3
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    How can you tell if it is high capacity or are all J&T high capacity pumps?
  4. Capt Ralph, Feb 3, 2020
    #4
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,443
    Location:
    Satsuma, FL
    How much pressure did you pump up? Max testing pressure is 8 psi.
  5. Capt Ralph, Feb 3, 2020
    #5
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,443
    Location:
    Satsuma, FL
    Some pumps are field servicable. Your dad shop should be able to help.
  6. Boomer, Feb 3, 2020
    #6
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    It was 5 or 6
  7. Capt Ralph, Feb 3, 2020
    #7
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,443
    Location:
    Satsuma, FL
    Oh DD shop. Not dad shop.
  8. Capt Ralph, Feb 3, 2020
    #8
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,443
    Location:
    Satsuma, FL
    6 is good. How much time on the leak?
  9. Boomer, Feb 3, 2020
    #9
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    I had about 9 hours sleep...lol...an hour seriously
  10. Capt Ralph, Feb 3, 2020
    #10
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,443
    Location:
    Satsuma, FL
    Go for a run. Could just be some trash on the machanical seal.
  11. Capt Ralph, Feb 3, 2020
    #11
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,443
    Location:
    Satsuma, FL
    I'm in Gainesville now. Big day tomorrow. I can't look up beans on this **** phone.
    Did we already talk about this pump?
  12. Boomer, Feb 3, 2020
    #12
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    Negative..you did ask if it was high performance or regular but that was as far as we got on it as my overheating problem happened gradually over the summer...
  13. Boomer, Feb 3, 2020
    #13
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    Where do you buy these reman pumps? JT wants $315...saw them on ebay for $180 hi flow or $100 regular flow...how do I know which one I have?
  14. Boomer, Feb 3, 2020
    #14
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    Good luck with the hip tomorrow!
  15. chesapeake46, Feb 3, 2020
    #15
    chesapeake46

    chesapeake46 Senior Member

    Joined:
    Jul 26, 2009
    Messages:
    1,829
    Location:
    Chesapeake Bay, Delaware Bay & S.Jersey
    Second that... Good luck tomorrow
  16. Capt J, Feb 3, 2020
    #16
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,534
    Location:
    Fort Lauderdale
    Call a DD shop with serial number on your engine and they should be able to look it up.
  17. T.T., Feb 3, 2020
    #17
    T.T.

    T.T. Senior Member

    Joined:
    Jan 22, 2010
    Messages:
    92
    Location:
    S.F.
    good luck RC, after care and PT will be your job for a bit!
  18. Boomer, Feb 4, 2020
    #18
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    Thx
  19. Capt J, Feb 4, 2020
    #19
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,534
    Location:
    Fort Lauderdale
    That being said, I'd be really hesitant of buying a rebuilt one off of ebay. Just think of all of the labor of dropping the coolant, adding coolant, taking all of the crap off of the front of the motor to get to it, etc. etc. to possibly save $100 or so.
  20. Boomer, Feb 6, 2020
    #20
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    FYI...Napa has these water pumps in stock, hi capacity for $92! Just passing along what I have found with a years warranty
Page 1 of 3