Schematics needed for electrical system; 2013 AZIMUT 48'

Keyword : MarineMax .

There going to figure out by learning the boat at $100 and hour.

A few years ago a neighbor of mine bought a 59 Marquis thru MM. Soon realized the sounder was only working intermittently... MM send two guys, three times, few hours plus travel each time with no luck. Took me 20’ to notice the xducer cable was laying on top and in direct contact with a air handler motor. Secured it away from the motor as it should have been and problem solved

Just one of many horror stories.

Glad you got it. While indeed there are a number of issues with the industry when it comes to design, access, maintenance and quality, do not use Az-mutt as an representative example of the industry

Those SeaTalk semi flat connects usually stay in pretty well if installed correctly. Strain relief is the #1 issue.
Lack of dips in the wires is #2 issue. Install techs these days just bundle and run.

No, it's not aerospace and should not be compared to it. This is recreational money. A level of quality and expense way different than in the 747 or lunar lander.

Your also looking at a 15+ year old, cheap & DIY design.
If it helps you feel better, That connect is no longer used.

Well, You got a taste of da Mut and won this time with all your fingers.
Sorry more Mut owners did not chime in.
Some of us may not be in luv with Azimuts but we are here to always try to help, or at least ensure your wearing safety googles when operating your recommended chain saw.
Please put up with my crappy humor.

Look forward to all new coming tales. Open a new thread on anything and send in lots of pictures (correct sized).
Disk space is cheap, boat stories live forever on Carls server.

You will be making your own diagrams.
I recall one question I thought was on a Mut looking for a (Windlass?) breaker.
Was in its own breaker box, in the shadows, next to a standard multi box behind one of those panels.

Somebody is going to take ships ETO responsibility and start tracing this stuff down. Getting close and personal with this ship. Protoscopes, cameras, notebooks, scanner or whiteboard notes on everything you find behind every lil panel you can find.

When I started managing boats, it used to be fun spending a quiet weekend with pots of coffee, learning about a new boat. Then, it was just leagle pads and different colored pens.
When the boats started getting larger and more complicated, I started pouring a lil Kahlua in the coffee, then just went to hooch.

#1 question I would ask my self;
Self, Why the heck did they do this,,, this way???

This mostly went un-answered.
That's when the rum came out to keep my head from spinning.

Honestly, I'm just the last red neck swab in North East Florida.
Just tried to retire again. Went back to hooch.

Next time you have the protoscope in there, look down to the deck. Just had a shiver go down my back,,, Thru the headliner from below?????

Also; is there a bubble compass on the fly bridge dash? Their usually top mounted.

Best thing is you fixed your problem. Just keep your eyes open for the same model Mut and ask that owner.
Please let us all know when you find out.