Click for Burger Click for Westport Click for Mulder Click for Cross Click for Northern Lights

Fiberglass work in Fort Lauderdale or nearby

Discussion in 'Technical Discussion' started by Ron Cardoza, Sep 17, 2018.

You need to be registered and signed in to view this content.
  1. Ron Cardoza, Sep 17, 2018
    #1
    Ron Cardoza

    Ron Cardoza Member

    Joined:
    Jul 26, 2018
    Messages:
    74
    Location:
    Fort Lauderdale
    Hello, A boat I'm looking at purchasing needs some fiberglass work on the Transom because owner took their lighted name off the back and did a terrible job filling in the holes. There are a total of 16 holes about 40' wide area in total (width of the name). Any recommendations on fiberglass repair here in area?

    Oversize images removed
    Last edited by a moderator: Sep 18, 2018
  2. MBevins, Sep 17, 2018
    #2
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,225
    Location:
    Windsor On. Canada
    Have you bought the boat yet?
    Quite frankly have him fix his own mess. That's outrageous.
  3. Ron Cardoza, Sep 17, 2018
    #3
    Ron Cardoza

    Ron Cardoza Member

    Joined:
    Jul 26, 2018
    Messages:
    74
    Location:
    Fort Lauderdale
    not yet. trying to understand if it's even possible to fix and cost because I would prefer to get it fixed here rather than to have to wait for possibly a below par job again.
  4. Norseman, Sep 17, 2018
    #4
    Norseman

    Norseman Senior Member

    Joined:
    Feb 24, 2005
    Messages:
    3,110
    Location:
    Ft. Lauderdale
    40” (inches) hopefully, not 40’ (feet)

    I have used CF Boatworks for that kind of work in the past: They are good, but not cheap. http://www.cfboats.com/
  5. Ron Cardoza, Sep 17, 2018
    #5
    Ron Cardoza

    Ron Cardoza Member

    Joined:
    Jul 26, 2018
    Messages:
    74
    Location:
    Fort Lauderdale
    yes 40" lol thanks!
  6. Capt J, Sep 17, 2018
    #6
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,531
    Location:
    Fort Lauderdale
    $5k to fix it would be my guess.
  7. Pascal, Sep 18, 2018
    #7
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    A good and exprienced glass guy can fix that easily. The key to match the gel coat assuming it is geocoat and not painted. I have a very good guy here in miami that has done repairs and mods for me over the years. He did a storage hatch on a flybridge a couple of years ago and you cant see its not factory. The gelcoat is a perfect match. I dont think he goes to FLL as he s busy here.

    In any case, the seller should get that done. If i was to make an offer on the boat i d build that repair in the offer.
  8. Norseman, Sep 18, 2018
    #8
    Norseman

    Norseman Senior Member

    Joined:
    Feb 24, 2005
    Messages:
    3,110
    Location:
    Ft. Lauderdale
    Can he be bribed, got any pictures of him on a farm? :)
    I need a good gel coat guy in Fort Lauderdale.
  9. Pascal, Sep 18, 2018
    #9
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    I ll ask him.
  10. Ron Cardoza, Sep 18, 2018
    #10
    Ron Cardoza

    Ron Cardoza Member

    Joined:
    Jul 26, 2018
    Messages:
    74
    Location:
    Fort Lauderdale
    I received a quote from a guy here for $2,200 and he was recommended from the sign company that he's done lots of work for.
  11. Pascal, Sep 18, 2018
    #11
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    That sounds reasonable.
  12. Ron Cardoza, Sep 19, 2018
    #12
    Ron Cardoza

    Ron Cardoza Member

    Joined:
    Jul 26, 2018
    Messages:
    74
    Location:
    Fort Lauderdale
    these are the recommendation I received for fiberglass repair from the sign company called YachtGraphx.com that does the litup names that I'm thinking of doing on my boat that did the previous owners boat litup name as well:

    Scott May
    $2,200 estimate

    Fiber Glass Tech
    waiting for estimate

    I'll let you guys know who I end up using and how it goes.

    Admin edit: Email addresses and phone numbers removed.
    Last edited by a moderator: Sep 19, 2018
  13. Jorge Lang, Sep 19, 2018
    #13
    Jorge Lang

    Jorge Lang Senior Member

    Joined:
    Nov 17, 2003
    Messages:
    297
    Location:
    Fort Lauderdale
    Call Richard at the Fiberglass Shop. You can look him up or PM me and I'll give you his number.