Click for Burger Click for Furuno Click for YF Listing Service Click for JetForums Click for Northern Lights

Man CR900 how would rubber chunks get into my oil cooler

Discussion in 'Technical Discussion' started by CSkipR, May 1, 2018.

You need to be registered and signed in to view this content.
  1. CSkipR, May 1, 2018
    #1
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Had the engine oil cooler removed to have the gasket replaced because of a slight oil leak. When they removed the oil cooler they found chunks of rubber inside that appear to have been a broken up round rubber gasket. Any idea how this would have traveled to the oil cooler and what it maybe. No other oil leaks.
  2. 30West, May 1, 2018
    #2
    30West

    30West Member

    Joined:
    Nov 14, 2016
    Messages:
    246
    Location:
    Holland, Michigan
    Round rubber gasket like an O-ring, or like a flat gasket? Was it on the water side or oil side?
  3. CSkipR, May 1, 2018
    #3
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    It looked like it was more a round flatter gasket possibly tapered. Not like an o-ring. Going to have to confirm today but pretty sure it was the water side.
  4. Capt J, May 1, 2018
    #4
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,531
    Location:
    Fort Lauderdale
    It might be the gasket on the end of the heat exchanger......do not quote me on this as I'm not that familiar with the insides of MAN's but I believe they have a rubber isolater gasket on each sides of the heat exchanger and that's how they get away without using any zincs in the raw water cooling system......
  5. CSkipR, May 1, 2018
    #5
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Yes it was definitely the water side.
  6. motoryachtlover, May 1, 2018
    #6
    motoryachtlover

    motoryachtlover Senior Member

    Joined:
    Jan 29, 2007
    Messages:
    693
    Location:
    smithfield, VA
    CSkipR are you done with Comachee Cove? I would like your thoughts on your experience there. If you would rather not post here, you could PM me. Hope all went well.
  7. CSkipR, May 1, 2018
    #7
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    I kind of think it might have been the thermostats that we replaced two years ago. Two of the three a portion of the rubber was missing and chewed up.
  8. CSkipR, May 1, 2018
    #8
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Sent you a pm.
  9. Capt Ralph, May 1, 2018
    #9
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,442
    Location:
    Satsuma, FL
    Is the usual tech still working on your MANs?
  10. CSkipR, May 1, 2018
    #10
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    No
  11. Capt Bill11, May 5, 2018
    #11
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,459
    Location:
    Sarasota/Ft. Lauderdale FL
    Is the cooler raw water cooled?

    If so, sounds like pieces of the raw water pump impeller to me.
  12. Capt Ralph, May 5, 2018
    #12
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,442
    Location:
    Satsuma, FL
    Now that that slob is off of your boat, Clean all up and go boating with a smile.
  13. ychtcptn, May 6, 2018
    #13
    ychtcptn

    ychtcptn Senior Member

    Joined:
    Jul 8, 2005
    Messages:
    513
    Location:
    Lighthouse Point, FL
    Raw water impeller pieces
  14. Pascal, May 6, 2018
    #14
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    What's the raw water flow? If the oil cooler is before the heat exchanger, chances are you find impeller pieces a lazy mechanic (or captain) didn't bother looking for
  15. ranger58sb, May 7, 2018
    #15
    ranger58sb

    ranger58sb Senior member

    Joined:
    Aug 20, 2013
    Messages:
    897
    Location:
    Chesapeake Bay, USA

    Something useful to know about Comachee Cove?

    -Chris