Click for Ocean Alexander Click for Burger Click for Abeking Click for Burger Click for Cross

Remove rust without damaging gel coat

Discussion in 'General Yachting Discussion' started by John Sakovits, Sep 20, 2016.

You need to be registered and signed in to view this content.
  1. John Sakovits, Sep 20, 2016
    #1
    John Sakovits

    John Sakovits Member

    Joined:
    May 14, 2015
    Messages:
    35
    Location:
    Portsmouth nh
    I know there are a number of products that remove rust stains but from what I understand most will etch the gel coat. Is there a product that will remove rust stains but will not etch or harm gel coat ?

    Thanks
  2. RT46, Sep 20, 2016
    #2
    RT46

    RT46 Senior Member

    Joined:
    Feb 22, 2011
    Messages:
    1,059
    Location:
    Long Island, NY
    Wink
  3. Capt J, Sep 21, 2016
    #3
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,531
    Location:
    Fort Lauderdale
    Yup Whink. It's in a brown bottle and can be found in some grocery stores by the laundry stain stuff. Pour a little on, watch the rust disappear, and rinse it off
  4. John Sakovits, Sep 21, 2016
    #4
    John Sakovits

    John Sakovits Member

    Joined:
    May 14, 2015
    Messages:
    35
    Location:
    Portsmouth nh
    Thanks for the quick feedback. So Whink makes a lot of products. Which one is it ?
    Thanks again!
  5. YachtForums, Sep 21, 2016
    #5
    YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,611
    Location:
    South Florida
    Probably the one labelled 'rust remover'. :rolleyes:

    Whink is good. Bar Keeper's Friend will also work.
  6. John Sakovits, Sep 21, 2016
    #6
    John Sakovits

    John Sakovits Member

    Joined:
    May 14, 2015
    Messages:
    35
    Location:
    Portsmouth nh
    It looks like this is a acid based product. Safe to assume that folks have not seen any deterioration or porosity in the gel coat after using Whink ?

    Appreciate the feedback.
  7. Capt J, Sep 21, 2016
    #7
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,531
    Location:
    Fort Lauderdale
    No damage to gel coat or paint with using whink that I have seen. I've been using whink for over a decade. The brown bottle labeled "rust stain remover".
  8. John Sakovits, Sep 21, 2016
    #8
    John Sakovits

    John Sakovits Member

    Joined:
    May 14, 2015
    Messages:
    35
    Location:
    Portsmouth nh
    Any issues with Whink rust stain remover and vinyl striping ? Just trying to be safe instead of sorry.
  9. Capt J, Sep 21, 2016
    #9
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,531
    Location:
    Fort Lauderdale
    No, it's made for removing rust stains on clothes (laundry) so it's not that harsh.
  10. g collis, Sep 25, 2016
    #10
    g collis

    g collis Member

    Joined:
    Jul 15, 2015
    Messages:
    127
    Location:
    Saint Simons Island Georgia
    I've had good luck with On Off. Just don't breath the mist.
  11. maldwin, Sep 25, 2016
    #11
    maldwin

    maldwin Senior Member

    Joined:
    Sep 20, 2009
    Messages:
    341
    Location:
    Dark Harbor Me/ Hobe Sound Fl
    I have just had to paint my 2008 Nordhavn hull due to someone using Wink on the rubrail. It ruined the gel coat below. I assume the deckhand, who should have been using Fritz for that project, was not rinsing enough. Still, i will never use Wink again near my Gelcoat.
    Best,
    Maldwin
  12. Fishtigua, Sep 25, 2016
    #12
    Fishtigua

    Fishtigua Senior Member

    Joined:
    Jul 20, 2007
    Messages:
    2,935
    Location:
    Guernsey/Antigua
    Like any acid based cleaner, don't leave it on for too long and rinse well. Gels, like Y10, linger and will discolour gelcoat over time.

    I use Corrosion X Rust Remover.
  13. praetorian47, Oct 4, 2016
    #13
    praetorian47

    praetorian47 Senior Member

    Joined:
    Aug 22, 2011
    Messages:
    258
    Location:
    Bayport, Midland, Ontario
    I use a product from sea-shield called rust stain remover. It will strip wax, but does not damage the gelcoat. I have a through hull the leaves a rust stain all the time, so I clean it off a few times a year with this. Just spray on, let it sit a few minute and rinse. Works well for me, better than anything else I've used and no adverse affects I've been able to see.