Click for Ocean Alexander Click for Abeking Click for JetForums Click for Cross Click for Abeking

Mounting a Boston Whaler on the foredeck / bow

Discussion in 'Post Yacht' started by hughdunlop, Feb 8, 2016.

You need to be registered and signed in to view this content.
Page 2 of 2
  1. hughdunlop, Feb 16, 2016
    #21
    hughdunlop

    hughdunlop Member

    Joined:
    Jul 5, 2014
    Messages:
    83
    Location:
    nova scotia
    Greatly appreciate all the suggestions guys....Still undecided , I really like the idea of simple , mind you , what ever goes on the foc'sle has to be practical , fairly light and look good. Would be terrible to mess with the profile of such a great looking vessel..... :)
  2. Capt J, Feb 17, 2016
    #22
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,540
    Location:
    Fort Lauderdale
    The most impressive RIB I have run was an 11' ZAR with a 50hp yamaha 4 stroke. It rode great and did over 30 knots.....
  3. hughdunlop, Feb 24, 2016
    #23
    hughdunlop

    hughdunlop Member

    Joined:
    Jul 5, 2014
    Messages:
    83
    Location:
    nova scotia
    `I bought a Highlander CL 260....Not sure how I will gear it up on the boat , I am wondering how to fasten it without getting into the headliner in the fwd cabin..
  4. P46-Curaçao, Feb 24, 2016
    #24
    P46-Curaçao

    P46-Curaçao Senior Member

    Joined:
    Mar 8, 2013
    Messages:
    734
    Location:
    Curaçao (CW), Hollywood (FL) and Amsterdam (NL)
    It can easily be stowed on your swim platform... with 8' 6" and 88 lbs the Highfield Classic 260 is a lightweight!
  5. Beau, Feb 24, 2016
    #25
    Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    I use a detachable St Croix 200 davit for my 10 ft hard bottom stored upside down on my foredeck. 6 hp yamaha stays in my stern deck box till needed. My davit toe mount is fastened into the toe rail, with a mounting clamp that attaches to the bow rail for stability. Custom harness so the vertical lift of the davit brings the bottom of the dink to the top of the bow rail. I think it has a 9:1 pulley system? Then manually swings in or out. Visit the web site for more info?
    Last edited: Feb 24, 2016
Page 2 of 2