Click for Walker Click for JetForums Click for Delta Click for Glendinning Click for Mulder

Awl Wood

Discussion in 'General Yachting Discussion' started by captbpomeroy, Oct 30, 2015.

You need to be registered and signed in to view this content.
  1. captbpomeroy, Oct 30, 2015
    #1
    captbpomeroy

    captbpomeroy New Member

    Joined:
    Nov 6, 2007
    Messages:
    13
    Location:
    Fort Lauderdale, FL
    Anyone have experience and input on Awl Wood coating? We are stripping cap rails and at the advice of my varnisher, I am leaning towards using the Awl Wood product. Would love some real use feedback, especially if there is any validity to its increased flexibility over Awl Brite.
  2. olderboater, Oct 30, 2015
    #2
    olderboater

    olderboater Senior Member

    Joined:
    Sep 2, 2013
    Messages:
    7,130
    Location:
    Fort Lauderdale
    I didn't know it was available in the US. Their site says it is not.
  3. YachtForums, Oct 30, 2015
    #3
    YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,611
    Location:
    South Florida

    Attached Files:

  4. Bill106, Oct 30, 2015
    #4
    Bill106

    Bill106 Senior Member

    Joined:
    Jan 9, 2010
    Messages:
    390
    Location:
    Beaufort NC
    It has been available in the US from my suppliers but unfortunately I haven't used it yet so don't have any firsthand reports for the OP.
  5. olderboater, Oct 30, 2015
    #5
    olderboater

    olderboater Senior Member

    Joined:
    Sep 2, 2013
    Messages:
    7,130
    Location:
    Fort Lauderdale
    Found my mistake. It's Awlwood MA which isn't available in the US. No limitations on Awlwood.
  6. Bill106, Oct 30, 2015
    #6
    Bill106

    Bill106 Senior Member

    Joined:
    Jan 9, 2010
    Messages:
    390
    Location:
    Beaufort NC
    Actually, the full line of the MA series is available, I just checked and two of my larger wholesale suppliers have plenty on the shelves. I'm about to start the interior coatings on a new build (destined for the African continent!) and will give the MA a shot and report back for the OP.
  7. Kafue, Oct 31, 2015
    #7
    Kafue

    Kafue Senior Member

    Joined:
    Nov 29, 2006
    Messages:
    1,166
    Location:
    Gold Coast Australia
    I have seen a new Fleming at the Sanctuary Cove Boat Show with the Awl Wood finish.
    At the time the sales person suggested it was a Burr Yacht sales "special product".
    I thought it was a reasonable look instead of the real thing, however I wonder how you would repair any chips without it looking patchy over the years.
  8. Pascal, Oct 31, 2015
    #8
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    I started using it inside my boat a few weeks ago. Easy to use and apply. Haven't used it outside but will soon on my sailboat.
  9. Capt J, Oct 31, 2015
    #9
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,532
    Location:
    Fort Lauderdale
    How is the smell and dry time between recoats?
  10. Pascal, Oct 31, 2015
    #10
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,546
    Location:
    Miami, FL
    The smell is better than clear Awlgrip :) you can recoat in 4 to 6 hours