Click for Mulder Click for JetForums Click for Westport Click for Furuno Click for Delta

AC aluminum mesh filters

Discussion in 'Technical Discussion' started by CSkipR, Aug 25, 2014.

You need to be registered and signed in to view this content.
  1. CSkipR, Aug 25, 2014
    #1
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    A couple of these filters are falling apart and time to replace. Checked with several ac houses and contractors with no success. The mesh is 1/4" thick and 7" x 15". Are carbon filters any better? Any ideas where to purchase?
    thanks.
  2. Caltexflanc, Aug 25, 2014
    #2
    Caltexflanc

    Caltexflanc Senior Member

    Joined:
    Sep 25, 2011
    Messages:
    244
    Location:
    North Carolina
  3. CSkipR, Aug 25, 2014
    #3
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Yes it is on the return air. Never seen it at a local hardware here.
  4. Capt J, Aug 25, 2014
    #4
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    You can use the thin fiberglass mesh filters or whatever they are that are black in color and cut to fit. The local dealer here for Cruiseair etc sells it. But I think even the black one in Home Depot would be fine (the one you cut to fit with the plastic re-inforcing mesh behind it.

    When you clean them, spray them with an anti-bacterial spray such as fantastick as bacteria will grow on them, prior to rinsing them out.
  5. Capt Ralph, Aug 25, 2014
    #5
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,440
    Location:
    Satsuma, FL
    We use the coarse mesh from Lowes or Home Depot (blue or green) and cut to size. The finer dark foam really restricts the airflow. That alloy mesh worked O K when new but the salt environment and age will prevail and EOL comes quickly. They (alloy mash) fall apart just in trying to clean them.
  6. CSkipR, Aug 26, 2014
    #6
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    I've tried HD before with no success but will give it a go again. Maybe missed them. Is is approximately 1/4" thick. Will try HD website. Thanks
  7. Caltexflanc, Aug 26, 2014
    #7
    Caltexflanc

    Caltexflanc Senior Member

    Joined:
    Sep 25, 2011
    Messages:
    244
    Location:
    North Carolina
    You could call Tavis Hardware in Cocoa and see what they have, and if they'd send it up to you. Makes HD look like the hardware dept at Walmart.