Click for Ocean Alexander Click for Westport Click for Delta Click for Westport Click for Mulder

Zf80a transmission

Discussion in 'Technical Discussion' started by DanM, Jul 2, 2014.

You need to be registered and signed in to view this content.
  1. DanM, Jul 2, 2014
    #1
    DanM

    DanM New Member

    Joined:
    Jan 19, 2011
    Messages:
    29
    Location:
    Racine, WI
    Sorry for this simple question but I need to confirm something and I do not have my manual. When checking the fluid level on a ZF 80A transmission, do you screw in the dip stick or just set it on top pf the threads with out screwing it in?
  2. Capt Ralph, Jul 2, 2014
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,440
    Location:
    Satsuma, FL
    the manual says run the engine to make sure the coolers are full of fluid. shut down. within a couple of minutes check the level with dip screwed in.
    this insures the dip is at the correct angle.
  3. DanM, Jul 2, 2014
    #3
    DanM

    DanM New Member

    Joined:
    Jan 19, 2011
    Messages:
    29
    Location:
    Racine, WI
    Thank you