Click for YF Listing Service Click for Mulder Click for Delta Click for Northern Lights Click for Burger

Man Engine CR900 temperature issue

Discussion in 'Engines' started by CSkipR, Jun 9, 2014.

You need to be registered and signed in to view this content.
  1. CSkipR, Jun 9, 2014
    #1
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Yesterday while trolling the starboard engine temp did not come up like the port engine. Only when I would start running the temp on starboard engine would come up to 190 otherwise the starboard engine was 160 or somewhere there about when port engine was 190.
    Is this a thermostat issue? Since the temp on the sb was lower I was not overly concerned but don't understand why it is happening.
  2. Capt Bill11, Jun 9, 2014
    #2
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,459
    Location:
    Sarasota/Ft. Lauderdale FL
    Could be a gauge or sender issue. Could be a thermostat issue. Could be a ....

    You'll have to do a little trouble shooting to track it down.
  3. CSkipR, Jun 9, 2014
    #3
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Cr900

    Capt Bill,
    I realize that more checking is needed although I was looking for more specific answers.
    What sensor would be providing the temperature?
    Is there a way to check the thermostat without taking apart?
    Could a cap be causing the problem? Anything to look for on cap?

    Like most engines it was fine running over here to the Bahamas and next time I cranked it this was the result.
  4. Capt Bill11, Jun 9, 2014
    #4
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,459
    Location:
    Sarasota/Ft. Lauderdale FL
    I'd start with using a IR temp gun to read the actual temps at various point on the engine and see what that gets you.

    What type of gauges do you have? If the old school dial type, did you try hitting the temp gauge with you hand to see if it would jump up? :)
  5. Old Phart, Jun 9, 2014
    #5
    Old Phart

    Old Phart Senior Member

    Joined:
    Mar 14, 2011
    Messages:
    1,329
    Location:
    I dunno
    Too many odd things happened after arriving in the Bahamas.


    Did your boat get hit by lightening after arriving in the Bahamas?


    You cannot see if on the hook - electrical system problems.


    Cannot poop - head will not flush (pump = electric).


    One engine running cooler than the other (sending unit = electric).


    Guess it's time for another boat. :D
  6. Capt J, Jun 9, 2014
    #6
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,524
    Location:
    Fort Lauderdale
    160F at idle trolling all day can be normal on a mechanical diesel. That being said, get an infra-red temperature gun and start reading temperatures. Check the temps before and after each thermostat if you can, that should tell you if one is stuck open or not...... It can also tell you if your gauge or sender is reading falsely as well.
  7. CSkipR, Jun 9, 2014
    #7
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Would love another one would you be willing to contribute. Got enough dollars tied up in this one. Thanks
  8. CSkipR, Jun 14, 2014
    #8
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Just the info I was looking for. Next time away from GT Club marina will check with heatgun on both sides of thermostat.