Click for Westport Click for JetForums Click for Perko Click for Glendinning Click for YF Listing Service

Post 42 hull #3. The return

Discussion in 'Post Yacht' started by baltimore bob, May 27, 2014.

You need to be registered and signed in to view this content.
Page 1 of 10
  1. baltimore bob, May 27, 2014
    #1
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    I'm going to to start a journal here on my boat's comeback. After taking a bushel of unused wiring (rat's nest) from the bridge yesterday, I thought it might be a good thing to do. She's a real mess that I figure would have been finished hadn't I found her. For $15,000 I bought a hull and 2 servicable engines. Stand by for the journey! (pictures on the way)

    Thank you Island Runner, for the inspiration!
  2. K1W1, May 27, 2014
    #2
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,429
    Location:
    My Office
    Hi,

    I wish you all the best and hope it does not get the better of you.

    I look forward to observing the rejuvenation from afar.
  3. baltimore bob, May 27, 2014
    #3
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    Well after 40 years of wood boats, the last 25 in a 37 Egg, I kinda know what I'm getting into. At least I don't have to worry about springing a plank!:cool:
  4. P46-Curaçao, May 27, 2014
    #4
    P46-Curaçao

    P46-Curaçao Senior Member

    Joined:
    Mar 8, 2013
    Messages:
    734
    Location:
    Curaçao (CW), Hollywood (FL) and Amsterdam (NL)
    Look forward to see your improvements too, I bought 13 months ago a 1981 Post 46 for just a little more money, and have renewed almost everything by now!:cool:
  5. Berean, May 27, 2014
    #5
    Berean

    Berean Senior Member

    Joined:
    Aug 26, 2007
    Messages:
    305
    Location:
    Sarasota FL
    I am excited to watch your progress!
  6. RT46, May 28, 2014
    #6
    RT46

    RT46 Senior Member

    Joined:
    Feb 22, 2011
    Messages:
    1,059
    Location:
    Long Island, NY
    Pics please!!!!
  7. baltimore bob, May 28, 2014
    #7
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    Ah, the ugliness begins!
    Here's the profile. The previous "owner" left the bow rail, pulpit, windlass and outriggers on the dock in Indian River Delaware. Said he didn't "need" that stuff! The new rubrail arrived a few days ago, need to get some paint on first.

    Attached Files:

  8. baltimore bob, May 28, 2014
    #8
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    Old faithful iron. Might even stop using oil once I pump out the 10w40 the previous owner was using. AutoZone's finest! Detroits definetly don't like multigrade oil.

    Attached Files:

  9. RT46, May 29, 2014
    #9
    RT46

    RT46 Senior Member

    Joined:
    Feb 22, 2011
    Messages:
    1,059
    Location:
    Long Island, NY
    DDs are like Harleys.

    They don't leak, they are marking their spot.
  10. water-baby, May 29, 2014
    #10
    water-baby

    water-baby Member

    Joined:
    Dec 22, 2012
    Messages:
    105
    Location:
    Wabasso, FL
    Of there ain't oil under them, then there ain't oil in them
  11. Mark I, May 30, 2014
    #11
    Mark I

    Mark I Member

    Joined:
    Sep 5, 2006
    Messages:
    123
    Location:
    Long Island/Pompano Beach
    Good luck with the project.

    On Detroits - one of the most bullet-proof engines ever made. Will run and get you home when logic says it should not.

    It is possible to get ahead of the drips but you will chase them forever. Not a big deal in my book.
    Kafue likes this.
  12. Capt Ralph, May 30, 2014
    #12
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,486
    Location:
    Satsuma, FL
    It is possible. Takes time & rum. I have managed a few with DDCs and have 12Vs in ours. No leaks.
  13. baltimore bob, May 30, 2014
    #13
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    I'm an old Detroit man...love em! Sure they are going to leak a bit I know, but running anything except straight 40 weight makes it worse. Can make them puff a little ble smoke too.
  14. Old Phart, May 30, 2014
    #14
    Old Phart

    Old Phart Senior Member

    Joined:
    Mar 14, 2011
    Messages:
    1,329
    Location:
    I dunno
    Let's hope she does not decide to delaminate near completion of restoration. :eek:
  15. baltimore bob, May 31, 2014
    #15
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    Thanks Phart!!! Today, small steps, at the helm:

    Attached Files:

  16. SeaEric, May 31, 2014
    #16
    SeaEric

    SeaEric YF Historian

    Joined:
    Jan 28, 2007
    Messages:
    1,373
    Location:
    out on the dock
    I formerly owned hull #194 which is a 1981. Great boats. well thought out and well put together IMO. Looking forward to watching your progress.
  17. baltimore bob, Jun 1, 2014
    #17
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    No major work today....something I learned over decades of wood boat ownership, while restoring your boat, make sure you still use her once in a while, lest you get disgusted and give up. So single up the lines, ice down the beer and go for a run! We did today. I'm fairly pleased, I need to work on the engines, or maybe change pitch, they only turned up 2300 rpm as opposed to the 2600 they should, still I was getting 22.5 knots per the GPS. 1800 netted 17.5, a great cruise speed. She was light on fuel with a super clean bottom, still, the old girl dances pretty good! A great day.:)
  18. chesapeake46, Jun 2, 2014
    #18
    chesapeake46

    chesapeake46 Senior Member

    Joined:
    Jul 26, 2009
    Messages:
    1,831
    Location:
    Chesapeake Bay, Delaware Bay & S.Jersey
    I think that's pretty good speed for " naturals ".

    Also, you are correct, you gotta ride the hobby horse once in a while to remind you why your doing all the work.
  19. baltimore bob, Jun 2, 2014
    #19
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    They are natruals, but J&T tweaked them to 310. The boat is real light right now, even the piece of iron oxide that was once a generator is out!:rolleyes:
  20. baltimore bob, Jun 3, 2014
    #20
    baltimore bob

    baltimore bob Member

    Joined:
    Sep 22, 2013
    Messages:
    314
    Location:
    Baltimore, Maryland
    Like I said, rusty old Onan is gone. Surprise of the week? I was ready to yank out the Cruisair condensing units when I decided to hook up a water hose and with a shot of R22, the 40 year old machines started making cold! Maybe they bought a few months stay of execution.:rolleyes:

    Attached Files:

Page 1 of 10