Click for YF Listing Service Click for Westport Click for Abeking Click for Mulder Click for Perko

Vinyl Headliners stains

Discussion in 'General Yachting Discussion' started by Dave Stranks, Apr 30, 2014.

You need to be registered and signed in to view this content.
  1. Dave Stranks, Apr 30, 2014
    #1
    Dave Stranks

    Dave Stranks Member

    Joined:
    Sep 6, 2008
    Messages:
    67
    Location:
    Coal Harbor Vancouver
    I have sectional ceiling panels in the living room of cream white vinyl and at the joins. I have black - grey spotting in a few places. Tried washing with soapy water but it seems to be in the material. I'm in a wet climate (Vancouver) and sort of guessing it maybe the staples holding the vinyl have sweated out.
    I have seen this happen even with galvanized and stainless on leather furniture at the cottage.
    Replacement would be a big job. Maybe touch up painting or stain
    Any ideas
  2. dsharp, Apr 30, 2014
    #2
    dsharp

    dsharp Senior Member

    Joined:
    Aug 23, 2009
    Messages:
    240
    Location:
    lake jackson, tx
    If replaced make sure they use monel staples. You may want to look on the net for an upholstery forum. There's one in particular that has a few members that do bimini's and boat cushions. I can't recall the name offhand
  3. Capt J, Apr 30, 2014
    #3
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,534
    Location:
    Fort Lauderdale
    If it's spots, it generally is mold that is on the back side of the material and coming through the front of it. Which will show as grey or even a red wine color a lot of times. Staples will generally show as a rust color. If you can get to the back side, spray it with a marine fabric mildew remover. I would highly recommend using a de-humidifier to get your humidity down. Getting your humidity way down may cause them to go away on their own.
  4. NYCAP123, May 1, 2014
    #4
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    My first thought was mold or mildew as well. Most modern air conditioning controls have a dehumidifier setting. Use it always when off the boat.
  5. Capt Bill11, May 2, 2014
    #5
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,459
    Location:
    Sarasota/Ft. Lauderdale FL
    Auto body and paint supply shops sell vinyl dye in spray bomb cans. They cover very well and look good as well. You would have to remove the panels and do them all. But it's cheaper and easier than replacing the vinyl.
  6. Dave Stranks, May 2, 2014
    #6
    Dave Stranks

    Dave Stranks Member

    Joined:
    Sep 6, 2008
    Messages:
    67
    Location:
    Coal Harbor Vancouver
    Thanks
    I'll check out the auto stores
  7. Capt J, May 2, 2014
    #7
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,534
    Location:
    Fort Lauderdale
    If the spots are from mold on the backside of the material they will come through the vinyl dye as well. I also don't recommend using the vinyl dye if your vinyl is in good condition otherwise because it changes the texture of the vinyl (makes it stiff) and also will eventually peel off.
  8. Capt Bill11, May 3, 2014
    #8
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,459
    Location:
    Sarasota/Ft. Lauderdale FL
    While I agree if your vinyl is in good condition otherwise and you can get it clean and remove the spots I wouldn't bother dying it. But for what it's worth, I've done a number of exterior cushion sets with spray vinyl die and I've never had it peel, never had it stiffen the vinyl that I noticed and spots and stains did not bleed through. The dye, at least not the ones I've use, is not like a paint that sits on the surface of the vinyl, it seems to soak in like the name dye would imply. I used the Dupli-Color and SEM brands as I recall. And since they are designed to be sprayed on very flexible surfaces like shifter boots, they don't crack or peel.

    But as they say, YMMV