In need of Onan electrical end

Amazon and eBay are less:

Amazon.com: tachometer non contact: Industrial & Scientific

and

Neiko 20713A Professional Digital Laser Photo Non Contact Tachometer | eBay

Saving my baby Gen

The Neiko is on the way from Amazon for $25. free two day shipping.

Thanks again guys, I will post my results.

Ralph, I only remember balancing tires with a bubble level. Maybe your not that old.

Dave

Saving my genny

Got the digital tach and it works great! No flicker, just a laser and a fast sample by the computer. Anyway I found I was running her at 1930 RPM. Too fast for me. So I settled on 1850 @ 61Hz @ 114.4 at load.
I think I will be OK for now. Going to carry an extra 12V supply to give the exciter a shock once in awhile. Thanks for letting me in this one and thanks for all your help. Next winter project (its 80 today):strip some awlgrip off some teak and see what she looks like. over.

My issue is exactly the same as this one. I am an owner of a Onan MDKD generator and lost the exhaust elbow due to severe corrosion. This allowed salt water into the generator portion.

I need a complete generator end . The stator and the rotor on mine is nonfunctional . I received a quote for new parts and the amount is punishing. There mast be a number of these sitting in someone's garage that I can buy?

Please give me a shout if you can help me! Your help is very appreciated.

Larry Redmond, Washington Phone Number Removed

I think there is a voltage regulator that is adjustable on those that you can adjust to get the voltage up to 120-125 volts, as well.

Thanks very much for the tip!

Have an old Onan that I replaced with a new Cummins 9kw. The back end is almost new. Less than 100 hrs. also has a brand new water pump if anyone is interested in parting it out let me know.

Do you still have you MDKD Gen end?

If it is a MDKD end Would love to speak with you!

Many thanks
Larry

It is a 8KW Looking through some paperwork looks like serial number is A870866636. I am heading to boat next week and will go by warehouse and verify serial number. Rings were worn and needed to be rebuilt so I just went a head and bout a new one and have all new power in both engines and genset.

Send any photos and I can tell if the same as I need. Is it separate for the engine now?

Did you happen to get any more information on your generator head?

Many thanks!

Larry

Sorry to be a past but I was curious whether you had any more information on your generator head

Larry