Click for Abeking Click for Mulder Click for Ocean Alexander Click for Glendinning Click for Burger

3607 measurement

Discussion in 'Carver Yacht' started by 1000 islands, Feb 1, 2014.

You need to be registered and signed in to view this content.
  1. 1000 islands, Feb 1, 2014
    #1
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea
    I'm building a swim platform shower for a 3607 aft cabin and I need some measurements if anyone can do that for me I will be eternally grateful.

    What I need is the distance from the stern rail to the deck, the distance from that to the rub rail and then to the swim platform.

    I tried to get it from my boat but it's shrink wrapped and almost impossible to be accurate.
  2. 1000 islands, Feb 4, 2014
    #2
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea
    Nobody able to do this.......aw come on someone. Pleeeeeeeeeeease:)
  3. No Worries, Feb 4, 2014
    #3
    No Worries

    No Worries New Member

    Joined:
    Sep 24, 2013
    Messages:
    23
    Location:
    Rothesay Yacht Club, Rothesay New Brunswick Canada
    Measurements

    Were you able to solve the measurements issue? I have a 3207 Carver...will measurements be useful if taken from my boat?
  4. 1000 islands, Feb 4, 2014
    #4
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea
    Yes they are the same boat other than length.
  5. No Worries, Feb 5, 2014
    #5
    No Worries

    No Worries New Member

    Joined:
    Sep 24, 2013
    Messages:
    23
    Location:
    Rothesay Yacht Club, Rothesay New Brunswick Canada
    Measurements

    I'd be happy to help, however, I am not sure what you mean by the "rail". Done understand what to measure. Can you send a drawing showing what your need as well as the description?
  6. RB480, Feb 5, 2014
    #6
    RB480

    RB480 Senior Member

    Joined:
    Feb 8, 2011
    Messages:
    226
    Location:
    New Buffalo, MI

    No they are not, not even close.
  7. Sea Ya, Feb 5, 2014
    #7
    Sea Ya

    Sea Ya New Member

    Joined:
    Sep 8, 2012
    Messages:
    29
    Location:
    Beach Haven, NJ
    Can help you out after the storm ends tonight.
  8. 1000 islands, Feb 5, 2014
    #8
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea

    Hmmm You're right. They look the same but after comparing both sterns on the net, they are different.

    Sorry for the assumption and thanks for the correction.
  9. 1000 islands, Feb 5, 2014
    #9
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea
    Thanks
  10. No Worries, Feb 5, 2014
    #10
    No Worries

    No Worries New Member

    Joined:
    Sep 24, 2013
    Messages:
    23
    Location:
    Rothesay Yacht Club, Rothesay New Brunswick Canada
    No Worries...good luck!
  11. NYCAP123, Feb 5, 2014
    #11
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    If you're using flexible hose (which you should), these measurements are not needed. They also may not be accurate for your individual situation depending where you install it on your swim platform. Simply get a safe amount of hose, run it to where you'll do the install and cut to length.
  12. 1000 islands, Feb 8, 2014
    #12
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea
    Must be one heck of a storm............
  13. Sea Ya, Feb 9, 2014
    #13
    Sea Ya

    Sea Ya New Member

    Joined:
    Sep 8, 2012
    Messages:
    29
    Location:
    Beach Haven, NJ
    Here are your measurements

    Top of rail to deck lip 27.5 inches
    Top of deck lip to deck .75 inches
    Top of deck lip to center of rub rail 13 inches
    Center of rub rail to top of swim platform 34.5 inches.
    Total is 75 inches from top of rail to swim platform

    Keep mind mind that the transom is curved in two directions and these measurements were taken between the ladder and the escape window.
    Hope this helps and sorry about the delay.
  14. 1000 islands, Feb 9, 2014
    #14
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea

    Perfect, thank you very much Sea Ya. Just what I needed.
  15. 1000 islands, Feb 10, 2014
    #15
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea
    I don't mean to be difficult, but are you sure it's 13 inches, because when I look at one on the net it looks to be more, like closer to 17"

    Attached Files:

  16. Sea Ya, Feb 12, 2014
    #16
    Sea Ya

    Sea Ya New Member

    Joined:
    Sep 8, 2012
    Messages:
    29
    Location:
    Beach Haven, NJ
    That appears to be a different style 3607 than I have. I do not have three port lights in the aft stateroom as shown. My boat is a 1989. Next time I go to the boat I will recheck the measurements.
  17. 1000 islands, Feb 12, 2014
    #17
    1000 islands

    1000 islands Member

    Joined:
    Apr 20, 2013
    Messages:
    203
    Location:
    Ivy Lea
    Mine has only 2 port lights......

    Attached Files: