Click for Mulder Click for Cross Click for JetForums Click for Abeking Click for Delta

exhaust lagging

Discussion in 'Technical Discussion' started by thatcher, Nov 28, 2013.

You need to be registered and signed in to view this content.
  1. thatcher, Nov 28, 2013
    #1
    thatcher

    thatcher Member

    Joined:
    Dec 1, 2010
    Messages:
    57
    Location:
    nassau, bahamas
    good day everyone, happy thanksgiving to all the americans. My exhaust lagging is starting to stain. It seems to be from the inside - out, and no cleaning products are working. Is there a cleaning solution for this or is replacement the way to go. Thanks in advance
    thatcher

    Attached Files:

  2. K1W1, Nov 28, 2013
    #2
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    Hi,

    That is certainly unusual looking staining.

    If you unwrap one of the blankets does the brown stain appear on the inner surface as well?

    If it is from the inside I think the only way to improve it will be to replace it if you cannot find a paint that can be applied to it.
  3. Marmot, Nov 28, 2013
    #3
    Marmot

    Marmot Senior Member

    Joined:
    May 20, 2007
    Messages:
    3,311
    Location:
    9114 S. Central Ave
    It appears to be only on the high spots. I think it might be from using cleaning products or abrasion from something. It looks like the aluminum coating is worn through.
  4. captainwjm, Nov 28, 2013
    #4
    captainwjm

    captainwjm Senior member

    Joined:
    Aug 17, 2010
    Messages:
    296
    Location:
    Miami, FL, Cape Elizabeth, ME
    Agreed
  5. NYCAP123, Nov 28, 2013
    #5
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    Exhaust leak?
  6. Old Phart, Nov 28, 2013
    #6
    Old Phart

    Old Phart Senior Member

    Joined:
    Mar 14, 2011
    Messages:
    1,329
    Location:
    I dunno
  7. K1W1, Nov 28, 2013
    #7
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    Not normally brown
  8. thatcher, Nov 28, 2013
    #8
    thatcher

    thatcher Member

    Joined:
    Dec 1, 2010
    Messages:
    57
    Location:
    nassau, bahamas
    gobble gobble

    Thanks everyone - No exhaust leaks, I havent used any products until now, just a wipe clean. I'll take a look at that paint. Nothing seems to penetrate the top side, when I get to the boat I'll remove that piece and see what's underneth.
  9. Capt Ralph, Nov 28, 2013
    #9
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,439
    Location:
    Satsuma, FL
    Looks like something or somebody has been rubbing on it. Is this riser near a entrance or hatch way? It it leaned on to access something in the E R?
  10. thatcher, Nov 28, 2013
    #10
    thatcher

    thatcher Member

    Joined:
    Dec 1, 2010
    Messages:
    57
    Location:
    nassau, bahamas
    Its at the entrance to the engine room, and has a railing in front of it.
  11. Capt Ralph, Nov 28, 2013
    #11
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,439
    Location:
    Satsuma, FL
    It's looks like the raised/high spots are worn. The low spots, like under a fold or crease, is not stained. Body oil/sweat or towel with some harsh cleaner/chemical has laid over it. I don't think it's from under the blanket.
    How does the other riser look?
  12. Capt J, Nov 28, 2013
    #12
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    That's not staining, that's the finish wearing off.
  13. thatcher, Nov 29, 2013
    #13
    thatcher

    thatcher Member

    Joined:
    Dec 1, 2010
    Messages:
    57
    Location:
    nassau, bahamas
    can this be painted with high heat paint?
  14. K1W1, Nov 29, 2013
    #14
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    Hi,

    Get a can and try it, it will be the cheapest solution if it works.
  15. JWY, Nov 29, 2013
    #15
    JWY

    JWY Senior Member

    Joined:
    Feb 22, 2004
    Messages:
    1,567
    Location:
    Ft. Lauderdale
    Looks like this might be a Firwin product. Who is the manufacturer?

    Judy
  16. Capt Bill11, Nov 29, 2013
    #16
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,459
    Location:
    Sarasota/Ft. Lauderdale FL
    +1 to that.
  17. thatcher, Nov 30, 2013
    #17
    thatcher

    thatcher Member

    Joined:
    Dec 1, 2010
    Messages:
    57
    Location:
    nassau, bahamas
    I ended up painting it. Came out great. I'll send pics on Monday. Thanks to all