Click for Northern Lights Click for Cross Click for Burger Click for JetForums Click for Furuno

Recommended spacing between Radomes

Discussion in 'Technical Discussion' started by Johngb24560, Oct 22, 2013.

You need to be registered and signed in to view this content.
  1. Johngb24560

    Johngb24560 New Member

    Joined:
    Jul 30, 2013
    Messages:
    30
    Location:
    Subic Bay
    We are upgrading the TVRO and Vsat systems on a 40 metre yacht and consequently remodeling the mast to accommodate the larger radomes. am getting conflicting information to the recommended spacing between domes. One expert tells m 3 metres minimum and another 1.2 metres minimum. I do not want to have interference between the units but 3 metres seems excessive. Is there a rule of thumb that applies to the spacing?
  2. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    Have you spoken to the manufacturer of the domes? They would know best
  3. Johngb24560

    Johngb24560 New Member

    Joined:
    Jul 30, 2013
    Messages:
    30
    Location:
    Subic Bay
    Radome Spacing

    I have contacted the manufacturer and they have recommended the 3 metre spacing between the radomes. With e dome diameter the centres ill be 4.2 metres. I am yet to see a megayacht anywhere with domes set at that spacing. This is why I am after opinions from those in the industry.
  4. olderboater

    olderboater Senior Member

    Joined:
    Sep 2, 2013
    Messages:
    7,130
    Location:
    Fort Lauderdale
    I guess my question would be is there something that prevents you or makes you not want to meet their recommendation? Is it a width issue or something in the way? Maybe it's excessive or not necessary or maybe it just reduces a 2% probability of interference to 0.002%. You might discuss it further with them to understand why they're saying so far apart.
  5. K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    I guess you have not seen many mega yachts then.

    Aren't the suppliers in the industry?
  6. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    Ditto that. If you go against the manufacturer's recommendations who are you going to go back to if there is a problem? Even if spacing isn't the cause for a problem it'll be cited until proven (by you) otherwise.