Fuel vent caps missing. Black ridged nipple coming out of hull. Cant find hose on inside of hull. Any clue of manufacturer?? THX
Thanks but I have checked West, Attwood, Perco and Forespar. Of course I can not find hose's inside hull.....
Are you saying this is on the side of your hull, starboard side. The fill caps for fuel are on topside port and starboard on the walk way. This to me looks like the exhaust fan from the cabin.
I do believe that is an Attwood 90 degreee P-trap fuel vent. They have slightly modified the design over the years and the current one is Part number 66419-3. The second one on the list. It is the one with the SS cap instead of black plastic. 90° P-Trap Vents : Attwood Marine
Was curious if you could share part number of replacement cap. I have one missing as well. Did you find a match or replace all caps to match? Thanks, Nomad69
Go to the Attwood site and get the color number you want. I ordered mine through West Marine. You will have to buy the entire trap vent and screw of the cap. I went with white to mactch othe through hull drains. No big deal as they are cheap. Hope this works for you.. 90° P-Trap Vents : Attwood Marine
thanks for the info. Another thing on my to do list. Thankfully they are not as pricey as the weather shield around the aft deck. I had to order a new left side, left rear corner, and left rear piece last week and I will have to say that Carver is proud of that stuff. Wouldn't you know that it is not just white acrylic, its a special gel-coat white acrylic.
Rivet: #7902700 Nylon 1 1/2" $0.36 each Standoff: #6678400 white nylon 3/4 x 7/8. $5.69 each Talk to Bret @ carver yachts parts dept. He is very helpful. My boat was missing these parts when I purchased it. I am replacing all the rivets with new ones to prevent other panels from coming loose due to age. Luckily the standoffs where still hanging on to the rivet stem. I only had to get five of those.
I am not really wild about the green either. I would like to go back with Black. Black will be hot but I like it, doesn't show the spider poop as bad. My canvas's are in good shape so that will be a little further down the to do list.
Boy the memories.been through all of that with the 355. Carver was pricy in the panels but at least they will still make them. They are a great company. And Brett is the best you will find.