Click for Mulder Click for Burger Click for Abeking Click for Glendinning Click for Northern Lights

John Staluppi's Yacht "Diamonds are Forever"

Discussion in 'Benetti Yacht' started by colintraveller, May 6, 2012.

You need to be registered and signed in to view this content.
  1. colintraveller, May 6, 2012
    #1
    colintraveller

    colintraveller Senior Member

    Joined:
    Oct 20, 2010
    Messages:
    211
    Location:
    scotland
  2. Norseman, May 6, 2012
    #2
    Norseman

    Norseman Senior Member

    Joined:
    Feb 24, 2005
    Messages:
    3,110
    Location:
    Ft. Lauderdale
    Is it usual to have 13 officers/crew on a 200' yacht?

    How is the crew quarters? Cramped, comfortable?
  3. Capt J, May 6, 2012
    #3
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,534
    Location:
    Fort Lauderdale
    Not at all and it might even be considered a bit light. On a 160' and 172' MY's that I worked on......both had a crew of 14.......I would think a 200' might run a bit more than 13 if doing charters and they have lots of toys......
  4. carelm, May 7, 2012
    #4
    carelm

    carelm Senior Member

    Joined:
    Feb 5, 2011
    Messages:
    403
    Location:
    fairfax va
    The interior seems a bit spartan though.:D
  5. C4ENG, May 7, 2012
    #5
    C4ENG

    C4ENG Senior Member

    Joined:
    May 19, 2006
    Messages:
    581
    Location:
    Ft Lauderdale
    And don't forget about those loving itineraries of travel all night to the next island and then set shop up all day for fun in the sun @ about 10 days straight. I always enjoyed seeing when it is over how every one is just stupid Lupe:D
  6. captholli, May 8, 2012
    #6
    captholli

    captholli Senior Member

    Joined:
    Jan 4, 2010
    Messages:
    1,184
    Location:
    In The Bilge
    Yeah it does seem to need a few more mirrors and "diamonte" sparkles but oh wait a second here, Hey there they are!! Right down here in the engine room where there supposed to be.:confused:The engine room has been taken to a new level of waayyyy too much mirror stainless on everything that could be sheathed in it. Not my taste but not my moolah either! the Engineer has to walk around with a bottle of Windex and a roll of paper towels as he backs out of the machinery space as not to leave any prints!! Looks like 99% of the pipe work has been done in polished stainless so that will get dicey three or four years down the road on the bilge and black water systems. At least theres a minimal amount of welded flanges on the pipe work as everything has been connected with Straub couplings. (polished of course!!);) Must say that the extierior profile is stunning and that the build team did an amazing job of space utilization thats not found on normal Benetti builds.