Click for Furuno Click for Mulder Click for Burger Click for Glendinning Click for Cross

A/P for 65' boat ?

Discussion in 'Technical Discussion' started by jhartog, May 2, 2012.

You need to be registered and signed in to view this content.
  1. jhartog, May 2, 2012
    #1
    jhartog

    jhartog New Member

    Joined:
    Jun 13, 2009
    Messages:
    52
    Location:
    Sag Harbor
    Hi
    There is a possibility - sigh - that I may have to replace the Robertson A/P that came with my 65' Viking M/Y (78,000 lbs, 2 x 820 MAN).
    I would be interested in opinions regarding what to consider.
    BTW - I have NavNet's at the helm.
    Thanks
  2. Capt Ralph, May 2, 2012
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,439
    Location:
    Satsuma, FL
    Sorry to hear about the Nav-Nets.
    On the A-Pilot recommendation, I have and always will have praise for the Simrad stuff. I don't your old options will carry up (maybe pump) but I love this stuff.
    The next comment said, I understand Navico owns Simrad now. I have contacted them with questions and they have been very helpful on the Robertson/Simrad equipment made in the last 20 years. The old Robertson library seems to be disappearing weekly. Spares other than cables and small options are long gone.
    What old pilot do you have? AP1XX to AP20? They were good ole units. Good used spares are still around. I have found allot of Hail-Mary parts on e-bay.

    ,rc
  3. Capt J, May 2, 2012
    #3
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    I also like the Simrad autopilots. The furuno autopilot would be my second choice.......
  4. ScrumpyVixen, May 3, 2012
    #4
    ScrumpyVixen

    ScrumpyVixen Member

    Joined:
    Jul 19, 2010
    Messages:
    86
    Location:
    Sydney
    Another tick for Simrads here
  5. jhartog, May 3, 2012
    #5
    jhartog

    jhartog New Member

    Joined:
    Jun 13, 2009
    Messages:
    52
    Location:
    Sag Harbor
    thanks for your input all.

    Re the NavNets - I am happy with them - just wish the interface (cursor scroll) was a bit easier than it is.
  6. Bamboo, May 3, 2012
    #6
    Bamboo

    Bamboo Senior Member

    Joined:
    Dec 19, 2008
    Messages:
    934
    Location:
    Palm Beach, FL
    I installed a AP-28 with related hardware about two years back and am happy so far in the 65 Donzi...
  7. Capt Ralph, May 4, 2012
    #7
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,439
    Location:
    Satsuma, FL
    There is a replacement ball from Fruno. About $80 each. The ball socket is also available (with out ball) for another $80. When the UV starts to eat up those balls, they will never scroll rite again.