Click for Cross Click for JetForums Click for Abeking Click for Delta Click for Abeking

Gelcoat repair help

Discussion in 'Technical Discussion' started by adambomb, Mar 30, 2012.

You need to be registered and signed in to view this content.
  1. adambomb, Mar 30, 2012
    #1
    adambomb

    adambomb Member

    Joined:
    May 12, 2004
    Messages:
    76
    Location:
    longisland n.y.
    I have a carver motor yacht and I have a 1 to 2 inch crack next to a hull vent and the repair guy says he can repair it but he can't guarantee a color match so I don't know if want to spend 400-500 on it is there a fix to just fill the crack and seal it.Thankyou
  2. Capt J, Mar 31, 2012
    #2
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    They may make a gelcoat repair kit that is in a 2 ounce tube that you can carefully apply to fill the crack. Try contacting Spectrum Color in Florida as they supply it and make it for most manufacturers. I know that it matches almost perfectly......I've bought it for Searay's and a Cruisers.......However try your dealer first as Spectrum usually only deals with companies in the industry.

    They can be found at All Categories
  3. NYCAP123, Mar 31, 2012
    #3
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    WM and most others sell a 2 part repair kit that you can blend, but matching is truly an art. I always keep a tube of QuickFix in my briefcase for when an owner has a little ding. It's not perfect, but generally looks fine (and more importantly prevents water intrusion) when they don't want to lay out several hundred.
  4. captainwjm, Mar 31, 2012
    #4
    captainwjm

    captainwjm Senior member

    Joined:
    Aug 17, 2010
    Messages:
    296
    Location:
    Miami, FL, Cape Elizabeth, ME
    Not sure who he used, but my repair guy took a small square of my gelcoat as a sample and sent it off to have an exact match. Gallon costs around $350 including shipping about a year and half ago.
  5. adambomb, Mar 31, 2012
    #5
    adambomb

    adambomb Member

    Joined:
    May 12, 2004
    Messages:
    76
    Location:
    longisland n.y.
    Who makes quick fix
  6. AlfredZ, Mar 31, 2012
    #6
    AlfredZ

    AlfredZ Senior Member

    Joined:
    Oct 29, 2009
    Messages:
    561
    Location:
    Landlocked in Europe
    Try Evercoat (ScratchPatch, Mix'n'Match).

    Cheers,
    Alfred
  7. Capt J, Mar 31, 2012
    #7
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    Spectrum color makes the gelcoat for many manufacturers. It is a thick paste that is already mixed to the correct color. Searay sells it in a tube, for their boats at the dealer. It's easy to use, can then be sanded and buffed/compounded and comes out near perfect. There's no mixing and matching.
  8. garyohv, Apr 18, 2012
    #8
    garyohv

    garyohv New Member

    Joined:
    Jun 13, 2011
    Messages:
    36
    Location:
    Florida & Oregon
    Coat with a spray can. Any paint suitable for exterior plastic...or find a car the same color as your deck and use auto spray paint.
  9. Capt J, Apr 18, 2012
    #9
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    To fix a crack? The poster, I believe wants to repair it properly with something that should last, and look like the crack wasn't there.
  10. adambomb, Apr 18, 2012
    #10
    adambomb

    adambomb Member

    Joined:
    May 12, 2004
    Messages:
    76
    Location:
    longisland n.y.
    I used the spectrum gel coat kit it was great , very happy with results
  11. Capt J, Apr 18, 2012
    #11
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    Good to hear that it worked out well for you.
  12. adambomb, Apr 18, 2012
    #12
    adambomb

    adambomb Member

    Joined:
    May 12, 2004
    Messages:
    76
    Location:
    longisland n.y.
    Thanks again capt j
  13. GFC, Apr 19, 2012
    #13
    GFC

    GFC Senior Member

    Joined:
    May 21, 2008
    Messages:
    221
    Location:
    Tri Cities, WA
    Adam, if you get in touch with Spectrum, tell them the make, year and model of your Carver and they will have a kit to match it. It's called a "Patch Paste" kit and it runs about $27. I've used them a couple of times and have had great luck with the quality of the material and the color matching.