Click for Glendinning Click for Cross Click for YF Listing Service Click for Burger Click for Northern Lights

Blueprint Turbos on Man 820s

Discussion in 'Engines' started by mikewheels, Mar 19, 2012.

You need to be registered and signed in to view this content.
  1. mikewheels, Mar 19, 2012
    #1
    mikewheels

    mikewheels New Member

    Joined:
    Feb 10, 2012
    Messages:
    25
    Location:
    North West Palm area
    I have 12 year old Man 820s which have not yet been serviced. With 1100 hours I will have the intercoolers pulled and flushed and the injectors retipped and valves adjusted and the turbos blueprinted. I am told the turbos will spool up quicker. Does anyone have experiance with getting the turbos blueprinted?
  2. Bill106, Mar 19, 2012
    #2
    Bill106

    Bill106 Senior Member

    Joined:
    Jan 9, 2010
    Messages:
    390
    Location:
    Beaufort NC
    One of the first things diesel engine "hot rodders" will do to tweak performance. In my experience I've seen an increase in performance about 70% of the time on new turbos and 90% on rebuilt ones. Blueprinting only brings them up to design specs and that will only help if they were "loose" to begin with. It isn't cheap to do but some folks will spend a lot of money to eek out every possible horsepower.
  3. Beau, Mar 19, 2012
    #3
    Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    MAN has a scheule of service items for the 1000 hour check. You may want to look at that. I suppose anything can be blueprinted, but I would expect a MAN turbo to be constructed to pretty high tolerances. Mine have been spinning fine since 1998.
  4. mikewheels, Mar 19, 2012
    #4
    mikewheels

    mikewheels New Member

    Joined:
    Feb 10, 2012
    Messages:
    25
    Location:
    North West Palm area
    Man turbos

    At what rpm should you hear the turbos spooling up? I hear mine at 1500 rpm.
  5. Capt J, Mar 19, 2012
    #5
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,524
    Location:
    Fort Lauderdale
    It depends on hull design and load factors at the different rpm points.
  6. CSkipR, Mar 19, 2012
    #6
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Mine start at 1400 rpm.