Click for Ocean Alexander Click for Walker Click for Burger Click for Cross Click for Abeking

Diesel Weight

Discussion in 'Technical Discussion' started by captdbg, Jan 23, 2012.

You need to be registered and signed in to view this content.
  1. captdbg, Jan 23, 2012
    #1
    captdbg

    captdbg New Member

    Joined:
    Mar 13, 2010
    Messages:
    20
    Location:
    Puert Vallarta Mexico,Dripping Springs Texas
    Does anyone know the weight of A Detroit DDC 1500 hp 16/92 and the weight of a Caterpillar C 32 Acert 1900 hp
    Thanks
    Danny
  2. K1W1, Jan 23, 2012
    #2
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    Hi,

    Cat Selection Guide gives dry weight of 6600 to 6950 lbs for that engine

    I found this when looking for something else this might answer your DD Question.

    http://www.yachtsurvey.com/Detroitratings.jpg
    Last edited: Jan 23, 2012
  3. Freespool, Jan 23, 2012
    #3
    Freespool

    Freespool New Member

    Joined:
    Aug 27, 2011
    Messages:
    18
    Location:
    Kemah, Texas
    Very close.
    7240 lbs for the 16V92 DDEC.
    7200 lbs for the C32 Acert. Plain C32 1650 is 1000 lbs lighter.
    You will likely need a bigger gear, shafts and such. Need to check tip clearence on the props to see if you can swing that much more wheel.
  4. Capt J, Jan 24, 2012
    #4
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    Increasing propellor pitch is not going to effect the clearance on the tips of the props. You should be able to keep RPM's in check with propellor pitch and gear ratio without resorting to increased diameter. Chances are diameter need not be increased since the origional diameter is enough for the boat as is. You could always increase the number of blades of the propellors instead of diameter as well.
  5. K1W1, Jan 24, 2012
    #5
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    Hi,

    The weight figure I gave came from a CAT Marine Engine Selection Guide.

    I used the numbers given for C32 ACERT Pleasure Craft Engines with a 1900 HP Rating E Rating, the C32 ACERT Commercial selection which maxes out at 1600 HP with a D Rating is given as being between 7100 to 7300 lbs dry.