Click for Abeking Click for Oceanco Click for Alexseal Click for JetForums Click for United

News: CCN To Build 31M Traditional-line Motoryacht

Discussion in 'Yacht News; Builds & Launches' started by Yacht News, Jan 9, 2018.

Thread Status:
Not open for further replies.
  1. Traditional-look 31-meter Motoryacht To Build At CCN
    Cerri Cantieri Navali (CCN) should be in a good mood over the news of a new build that was recently signed. They inked a 31-meter motoryacht with classic lines by Guido de Groot that when completed will go to a European owner. The all-aluminum vessel was signed at the end of 2017 and will form part of what they call their Fuoriserie line. The trideck yacht has arrangement over two internal decks and a spacious sundeck. The design of the yacht more looks like what you would expect from Dutch builder Moonen, if you are familiar with their designs.
  2. The design styling is by Guido de Groot both on the exterior and the interior. There is a three-cabin layout onboard for the owner and guests. A full-beam master suite and two guests cabins is how it is arranged on the lower deck. The main deck arrangement is pretty typical, with a main saloon, dining area as well as galley and then the wheelhouse up front.
  3. Power wise, it appears that the vessel will use a mix of conventional diesel engines and electric motors. Top speed is anticipated to be 12.5-knots while efficient cruising will be 8-knots or so. The sundeck is truly where most of the external entertainment will be hosted as the area is fairly spacious for this size yacht. While it is an open-air deck, the space is covered by a hardtop. That hardtop can be opened up likely with a fabric ceiling when needed.

    For more information:

    Cerri Cantieri Navali
    Viale Zaccagna, 6
    54033 Avenza,
    Marina di Carrara (Massa Carrara, Italy)
    www.cerricantierinavali.it

    ***​
Thread Status:
Not open for further replies.

Share This Page