Very happy with my Victron Phoenix 50 Amp 120v. Charger.
RT46, by chance do you have pictures of the Port side Air Sep installed? Thank you
on my 1975, when the tanks were replaced, we used all hose from the fill to the tanks.
Here are some photos- hose is the simple solution
I’m installing Air Seps in my 1988 46’ Post. The fuel fill line need to be re-routed a bit for clearance for the air sep...and yea it’s tight on...
On last boat I installed flow scans- very reliable, but older technology. They need careful calibration vs these maretron once set up for the...
No issues at WOT...the orifice of the JIC connectors lines used on the return side was similar to the stock discharge elbow with the restriction....
They work great, once they were set up I've not had any issues. Customer service at Maretron was awesome!
Don’t fall in love... look at other boats!
System installed and running, I spent $2800 with all components, hoses and nema 2k cables and so far impressive running off my Garmin 7212’s. The...
After I removed the old tv and trim. A tv surround was built to accommodate the tv, it looked like a glorified snack tray at first, then using a...
Here is the 1988 46 original...hope this helps. [ATTACH]
We had the little square tv also, I had this surround built, and put a door to access behind. Note the bottom, the tv electronics are behind that...
A lot of damage under those plates and in the channel that the pin is supposed to be in, I need to repair that with some glass and epoxy. Every...
Thanks..
What about having some tabs welded to those caps to make an L shaped bracket, large enough to house a 3/8 bolt that the wheel can ride on?
Any idea how I could source a bushing? Also, after that would I dremel out and re-secure that in epoxy? What or how would that be held?
Thanks, we used the existing space by relocating the AC vent, used the existing doors to the cabinet, but cut out the centers to mount plexiglass...
Here was our upgrade. [ATTACH]
Here is a photo of it[ATTACH]